Posted on

Do male cannabis plants produce male seeds

Sexing Cannabis: How to Tell the Difference Between Young Male vs Female Cannabis Plants

Are you growing cannabis at home, but aren’t sure if your plants are male or female? Then you’ve come to the right place! This article is going to show you how to tell the difference between male and female cannabis plants to properly sex them.

In particular, I want to show you how we determine the sex of our cannabis plants while they are still quite young. It gets significantly more obvious as the plants begin to mature and flower. On the other hand, it can be a bit more tricky to sex cannabis plants in the early pre-flower phase, but it is definitely possible! We’ll also talk a bit about why it is important to determine the sex of cannabis plants, the difference between regular and feminized seeds, how we treat our plants up until the time we know their sex, and what to do with unwanted male plants.

If you’re new to Homestead and Chill, be sure to check out our other cannabis-related articles! We primarily grow outdoors, 100% organic, and aim to provide helpful information that is easy to follow – both for new and experienced growers alike. As a disclaimer, this article is intended for those who can legally grow cannabis at home.

Feminized vs Regular Cannabis Seeds

If you are growing from feminized seeds, you shouldn’t need to worry about sexing your cannabis plants all that much. While not 100% guaranteed, there is only a very slim chance that a feminized seed will produce a male plant. About 1% in fact. In all of our years growing, we have never had a cannabis plant grown from feminized seed turn out to be a male – though we only grow a handful of plants per year. Folks who grow hundreds of plants could potentially end with a rare male now and then.

Feminized seeds are highly desirable to most growers. They’re efficient. It is almost sure-fire that you’re spending your energy and resources raising ladies. However, some growers accept or even prefer regular (unsexed) seeds! We grow a little of both.

Why grow regular cannabis seeds? Well, maybe a particular breeder or strain you want to try only carries regular seeds. Some growers feel that the feminization process is unnatural, and prefer to kick it old school by growing regular seeds only. Some enjoy the gamble and challenge. Whatever the reason, when you grow cannabis from regular seeds, the odds of getting all lady plants are not in your favor. You will end up with some males. Therefore, you need to learn to sex your cannabis plants! Also, we always start several extra “regular” seeds – assuming a 50/50 chance that some will be culled because they are male.

How are feminized cannabis seeds made?

Curious about how feminized seeds are created? In a nutshell: most feminized seeds come from cannabis plants that have been treated and altered in a manner that inhibits male chromosomes. The most common method is to spray the plant repetitively (daily or more) with colloidal silver. Other chemicals and compounds can be used too, but are far less accessible. Colloidal silver is technically “non-toxic”, but you do not want to smoke it! Thus, the plant is sacrificial – used for the production of pollen and seeds only.

Repeated colloidal silver treatments cause repression of the plant’s ethylene, which is the stuff that creates male flowers. Instead, the treated female plant will grow pollen sacks full of FEMALE pollen (XX rather than XY). Then breeders use the female pollen to pollinate female flowers, resulting in the development of all-female seeds.

Another way to create feminized cannabis seeds is called rodelization. It is a more natural but unreliable method, and less frequently used by breeders. Near the end of a growing season, an un-pollinated female cannabis plant will sometimes produce pollen sacks in a desperate attempt to pollinate herself. That pollen can be used to try to create feminized seeds, but because ethylene hasn’t been repressed, may also result in male seeds.

Okay, back to sexing cannabis.

Why Sex Cannabis Plants? The Role of Male and Female Plants

For the most part, the average home grower wants female cannabis plants. The ladies are the ones that produce the fattest, most resinous and most potent flowers – aka buds. Male cannabis plants are only desirable if someone wants to breed cannabis and save seeds (which is a whole other topic for another day). Even then, the grower will want to spot the difference between the male and female plants and separate them early on, unless they want free cross-breeding and pollination between many types of strains.

Not only are the males less desirable, but male cannabis plants interfere with the quality and production of your female plant. Males grow pollen sacks, and produce pollen. When a female cannabis plant becomes pollinated by a nearby male, her energy shifts into producing seeds.

Like most things in nature, female cannabis plants have a biological drive to reproduce. After the deed has been done, she will sit back and relax. While a pollinated female cannabis plant WILL still develop decent size buds, they are usually lower quality and contain less THC and other desirable cannabinoids. Not to mention, they’ll be full of seeds. When left un-pollinated, a female cannabis plant’s flowers (buds) will continue to swell, develop more trichomes and become increasingly resinous. She is trying to get as sticky and large as possible to catch pollen in the wind. That sweet sinsemilla – aka unfertilized, seed-free cannabis.

When to Sex Cannabis Plants

Our goal here today is to learn how to tell the difference between male and female cannabis plants early on, so you can get the males away from the females as soon as possible! It will help protect your lady plants – but also spare you the wasted time, resources, and energy of tending to male plants that you don’t intend to keep.

Keeping in mind that every strain and grow set-up (e.g. indoors, outdoors, daylight hours) creates varying circumstances, most cannabis plants begin to pre-flower as early as 4 weeks after germination. By week 6, the pre-flowers begin to reveal their gender and you should be able to identify the sex using the tips to follow. Once the plants go into full flower (8 to 10 weeks on average, for a natural outdoor grow) the differences between male and female plants will be glaringly obvious. We’ll talk more about exactly what each sex looks like in a moment.

Until we can tell the sex for sure, we continue to treat the plants equally. We start our seeds in small 4-inch nursery pots. About two weeks after germination, we pot the seedlings up into an approximately two-gallon (trade size) “sexing pot” like these BPA-free nursery pots. This enables everyone to continue to grow in a happy and healthy manner for several more weeks*. Then, once we can surely tell the difference between the male and female cannabis plants, only the ladies move into their forever home – 15 to 25 gallon grow bags full of recycled organic living soil. To learn more about our soil recipe and how we maintain it, see this article.

*Note that our feminized seedlings go from a 4” pot to an 8” pot, and then more quickly into large grow bags, using less soil in the potting-up process.

See also  Purple killer seeds

This little girl (or boy) is far too young to tell, but needs to be potted up soon. The two in plastic pots in the background were determined to be male and culled the next day. The two on the left in grow bags are definite females (one from feminized seed, and one we sexed from regular seed).

How to Tell the Difference Between Male and Female Cannabis Plants in Pre-Flower

In order to correctly sex cannabis plants, you’ll need to become familiar with their anatomy in general. Both males and females produce pre-flowers and flowers in the junctions between stems or branches. The very first pre-flowers show up in the crook between the main plant stalk and a fan leaf stem (petiole), usually near the top of the plant. The good news is, the males usually begin to develop and show sooner than females. I guess the idea is that the dudes want to have their pollen ready and waiting for when the ladies join the party?

Look for plant pre-flowers at the higher stalk/branch junctions, as described above. If needed, use a jeweler’s loupe to get a better look! That is the same magnifying tool commonly used to examine trichomes and determine plant readiness for harvest. Then, locate the stipule, which is a leafy pointed flap that protrudes from the junction. Don’t confuse that for a pre-flower! The cannabis sex parts are located just behind the stipule. Behind the pre-flower sex parts, taller growth tips will emerge – future auxiliary branches that produce buds.

Identifying a Male Cannabis Plant

Very early, the male pre-flower (early pollen sacs) simply looks like a more round version than the female pre-flower part. It is often referred to as a “spade”, like the spade suit in cards – squatty with a bulbous bottom and very slight tip. As it becomes slightly larger, the male pre-flower resembles a ball at the end of a stick. The male pre-flower is called a staminate. Then, the staminate eventually develops into a long hanging sack of baby bananas – the pollen sacs. Hopefully you can ID and cull the males before they get to this stage.

A 4-5 week old male cannabis plant in our garden, showing his stick and ball. Note that this is a really early and obvious example. Most of the other males in this age group show a round ball, but protruding less and more nestled flat against the stalk.

A more advanced male pre-flower, courtesy of Dr. Weedly (We never let our males get this far to photograph)

Did someone order a banana hammock? The male flowers are about to open and shed pollen, if they haven’t already. Photo from Green Cultured

Identifying a Female Cannabis Plant

In contrast, the very early female cannabis pre-flowers are more ovate in shape: pear-like, but with a longer slender pointed tip. That is called her calyx. Extending from the tip of the calyx may be a pair of pistils, or white hair-like protrusions. However, please note that not every female cannabis plant in pre-flower produces pistils.

If you are still unsure of the sex of your cannabis plant, wait to make any drastic decisions! Yet if you’re fairly certain, consider some of these other common differences between male and female plants. Perhaps it will help you more confidently make a decision.

Other Common Differences Between Male and Female Cannabis Plants

Aside from the clear-cut flower differences, there are a few (potential) trending characteristics between male and female cannabis plants. In many cases, male cannabis plants tend to be more gangly. They may be tall, narrow, have fewer fan leaves, and longer spacing between branches – also referred to as greater inter-nodal spacing. On the flip side, female cannabis plants are usually more compact and bushy than males.

Please keep in mind that these traits are not guaranteed, and shouldn’t be the only way to sex cannabis plants! Variations among strains and phenotypes can lead to all sorts of crazy things. The general plant structure simply may help give you a clue if you’re on the fence.

My Cannabis Plant is Male! Now What?

I hope you started a few extra seeds, and have plenty of ladies left to grow! Once you determine that you have a male cannabis plant, get rid of it. Again, unless you want pollination and seeds, it is best to cull the males as early as possible. Simply separating the plants isn’t enough. Even if you relocate the male plant to another part of your yard, the pollen can carry in the wind. There are stories of female cannabis plants becoming pollinated from neighbors growing several blocks away.

However, the culled males don’t need to go to waste! One option is to chop up the male plant and use it to mulch other plants – much like we do with borage, fava bean greens, yarrow, and comfrey. You could also juice the leaves, which are full of nutrients. Heck, you could even steep the plant material in water to create a natural fertilizer as we do with stinging nettle. Finally, I’m sure your compost pile will welcome the male plant with open arms. Or would that be… with open worms?

Need a chill pill, minus the pill? Check out favorite organic full-spectrum CBD oil – NuVita! Use our affiliate code “DEANNACAT” to save 10% any time. With less than 0.3% THC, it is non-psychoactive and legal in the US. The orange label is great for anxiety, stress, inflammation, and pain – anytime. The CBG (white) has some added power against inflammation, IBS, nausea, and cancer cell growth. CBN (black) will help you sleep more soundly while also easing tension, perfect for bedtime use.

And that is how you determine the sex of cannabis plants.

In closing, I hope this article is interesting and useful in your homegrown adventures. Please feel free to ask questions in the comments below, and spread the cannabis sex love by sharing this article. Even if you like to grow mostly feminized seeds, don’t you find this stuff fascinating? I sure do. Thanks for tuning in and nerding out with me a bit. Best of luck this growing season!

Marijuana plant anatomy

The cannabis plant has several structures, many of which we can find on any ordinary flowering plant species. Cannabis grows on long skinny stems with its large, iconic fan leaves extending out from areas called nodes.

Cannabis really stands out in its flowers—or buds—where unique and intricate formations occur: fiery orange hairs, sugary crystals, and chunky buds enveloped by tiny leaves.

Parts of the cannabis plant

Seeds

Seeds are produced in female cannabis plants and carry the genetics of a male and female. Seeds need to germinate to sprout and will grow a taproot, which will become the main root that anchors the plant.

Cotyledon leaves

These are the first leaves to grow from the seed after germination. They usually come in pairs, and seeing them is a sign of successful germination and that your plant is on its way to growing healthy and strong.

Roots

The roots grow down from the main stalk of the plant into the soil. When growing from a seed, the main root is called the “taproot.” Roots are the lifelines of a cannabis plant, pulling water and oxygen into the plant so it can grow healthy and strong.

Mycorrhizae, a beneficial fungus, can be added to soil to improve root systems.

See also  Best cannabis seed bank for outdoor

The main stem, or stalk, of a cannabis plant grows straight up from the root system and supports all lateral branches. The stem gives a plant structure and stability.

Often, growers will top, or cut off, the stem after about five nodes, which forces the plant to grow out laterally more, creating more bud sites.

Branches

Branches grow out of the main stem and support fan leaves and buds. Growers often train a cannabis plant by topping branches to create more bud sites.

A node is a point at which a branch grows off of the main stem, or one branch from another branch. Fan leaves and buds can grow on some nodes, but not necessarily all.

When determining the sex of a cannabis plant, pre-flowers, or the beginnings of male and female sex organs, will appear at the nodes.

The space between nodes is called “internodal spacing” and will give you a sense of whether a plant will grow tall or short.

Check out Johanna’s full video series on how to grow weed on Leafly’s YouTube .

Fan leaves

Fan leaves are the large, iconic leaves of the cannabis plant. They capture light for the plant and typically have little-to-no resin and are usually discarded when trimming.

Sugar leaves

Sugar leaves are the small, resin-coated leaves that buds form around. Sugar leaves are usually saved as “trim” during harvest and can be used for pre-rolls, extracts, and other cannabis products.

Flowers

Also known as “buds,” the flowers of a cannabis plant are the fruits of your labor. They contain the cannabinoids and terpenes that get you high or offer health benefits. Flowers only grow on female cannabis plants and must be dried before consumption.

A cola, also called a “bud site,” refers to a cluster of buds that grow tightly together. While smaller colas occur along the budding sites of lower branches, the main cola—sometimes called the apical bud—forms at the top of the plant.

Bract and calyx

A bract is what encapsulates the female’s reproductive parts. They appear as green tear-shaped “leaves,” and are heavily covered in resin glands which produce the highest concentration of cannabinoids of all plant parts.

Enclosed by these bracts and imperceptible to the naked eye, the calyx refers to a translucent layer over the ovule at a flower’s base.

Stigma and pistil

The pistil contains the reproductive parts of a flower, and the vibrant, hair-like strands of the pistil are called stigmas. Stigmas serve to collect pollen from males.

The stigmas of the pistil begin with a white coloration and progressively darken to yellow, orange, red, or brown over the course of the plant’s maturation. They play an important role in reproduction, but stigmas bring very little to the flower’s potency and taste.

Trichomes

Despite their minute size, it’s hard to miss the blanket of crystal resin on a cannabis bud. This resin is secreted through translucent, mushroom-shaped glands on the leaves, stems, and calyxes.

Plants originally developed trichomes to protect against predators and the elements. These clear bulbous globes ooze aromatic oils called terpenes as well as therapeutic cannabinoids like THC and CBD. The basis of hash production depends on these trichomes and their potent sugar-like resin.

Male vs. female marijuana plants

Cannabis is a dioecious plant, meaning it can be male or female, and the male and female reproductive organs appear on different plants. What’s in your stash jar now are the flowers of a female marijuana plant.

Female plants produce the resin-secreting flower that is trimmed down into the buds you smoke, and males produce pollen sacs near the base of the leaves. Male plants pollinate females to initiate seed production, but the buds we consume come from seedless female plants—these are called “sinsemilla,” meaning “seedless.”

Growers can ensure the sex of their plants by growing clones or the genetically identical clippings from a parent strain. Feminized seeds are also made available through a special breeding process.

How to determine the sex of a marijuana plant

Cannabis plants show their sex by what grows in between their nodes, where leaves and branches extend from the stalk. Pollen sacs will develop on a male plant to spread seeds and stigma will develop on a female to catch pollen. You can see these differences weeks before they actually start serving their purposes in the reproduction cycle. These are known as “pre-flowers.”

Pre-flowers begin to develop four weeks into growth, but they may take a little longer depending on how quickly the sprouting phase occurs. By the sixth week, you should be able to find the pre-flowers and confidently determine the sex of your plant.

Examine the nodes of the plant and look for either the early growth of small sacs on a male, or two bracts on a female, which will eventually produce the hair-like stigma.

Female marijuana plants

Females are the prizes of cannabis plants—they are the ones that grow the buds that we all know and love. Anytime you see a picture of a cannabis plant with buds, you are looking at a female plant.

Female cannabis plants receive pollen from males to produce seeds, which will carry on the genetics of both plants to the next generation.

However, cannabis is primarily cultivated for buds, not seeds, so the practice of growing sinsemilla, or “seedless” cannabis, is prevalent today: Females and males are grown separately, or males are even discarded, to prevent pollination. This allows female plants to focus their energies on bud production instead of seed production.

Males and females are usually only pollinated when crossbreeding plants or creating new strains.

Male marijuana plants

Male cannabis plants grow pollen sacs instead of buds. Male plants are usually discarded because you don’t want them to pollinate the females, which will produce seeds—no one wants to smoke buds with seeds in it.

Males are important in the breeding process, but that is generally best left to expert breeders. When pollinating females, males provide half of the genetic makeup inherited by seeds.

Because of this, it’s important to look into the genetics of the male plants. Their shape, rate of growth, pest and mold resistance, and climate resilience can all be passed on to increase the quality of future generations.

Male plants can also be used for:

  • Hemp fiber—males produce a softer material, while females produce a coarser, stronger fiber. The soft fiber from males is more desirable for products like clothing, tablecloths, and other household items.
  • Concentrate production—males do have some THC and can be psychoactive, but much less so than females. Small amounts of cannabinoids can be found in the leaves, stems, and sacs, which can be extracted to produce hash and other oils.

What are hermaphrodite cannabis plants?

The rare hermaphroditic plant contains both female and male sex organs. These plants can sometimes self-pollinate, but this is typically bad as it will create buds with seeds and also pass on hermaphroditic genes.

“Herming out,” as some call it, is something that generally happens when a plant becomes excessively stressed. Some stressors include:

  • Plant damage
  • Bad weather
  • Disease

There are two types of hermaphrodite plants:

  • A plant that develops both buds and pollen sacs
  • A plant that produces anthers, commonly referred to as “bananas” due to their appearance

While both result in pollen production, true hermaphrodite cannabis plants produce sacs that need to rupture; anthers are exposed, pollen-producing stamen.

Because this occurs when cannabis is under stress, it’s important to monitor plants after they have been exposed to stressors: indoors, high temperatures or light leaks are often the cause; outdoors, a snapped branch might be repaired and then turn into a hermaphrodite.

See also  Tahoe kush cannabis seeds

The other primary cause of hermaphrodite plants lies in its genetics—a plant with poor genetics or a history of hermaphroditic development should be avoided to protect your garden. If you notice any pollen sacs or anthers at any point, remove the plant from your garden immediately to prevent pollination of female plants.

5 Things You Can Do with Your Male Cannabis Plants

In the wide world of weed, the female of the species is more useful than the male. The marijuana plant is like many other plant species in the world. It needs both a male and female plant to reproduce (it is a dioecious species). Admittedly, there are self-pollinating cannabis plants (i.e., monoecious plants). In general, however, most marijuana plants express female or male-specific sex organs.

It is the female plant that produces the buds we dry, cure, and use. As a consequence, the average weed garden is populated by female plants only. It is considered marijuana growing 101 to discard and destroy male plants as soon as you uncover their growth. If you don’t, they will pollinate the females. Their seeds end up in the bud and reduce the amount of THC found in the plant after harvest.

If you usually expel male plants from your cannabis garden, you are missing out! Contrary to what you believe, they do have a beneficial purpose to gardeners. They have several, and we outline five of them below.

1 – Breeding Cannabis

As a beginner, you have the option of cloning the mother plant and creating a ceaseless line of consistent buds from identical female plants. However, as you become more skilled, you will begin to find flaws with your bud. For example, you may want it to be more resinous and potent. Alternatively, you might love it if the flowering stage ended a bit sooner.

Fortunately, male cannabis plants are around to come to your rescue! As you know, their primary function is to breed seeds. When a male plant pollinates a female, it provides 50% of a seed’s genetic makeup. With this in mind, do some digging into the genetics of the males in your garden. Do they grow quickly? Are they highly resistant to mold and pests? If so, these positive traits can be passed on to boost the quality of new generations.

Since you can’t smoke a male plant to find out how good it is, you must go through a different process to find suitable genetics.

Here’s a 5-step guide to eliminating unwanted males and finding ideal plants for breeding:

  1. Get rid of early flowering or auto-flowering males as they are more likely to produce monoecious individuals.
  2. Remove any males that grow extremely quickly or are very tall. In general, these particular plants are best for producing fibers rather than flowers.
  3. Keep plants with large and hollow stems and get rid of any stems with too much pith (spongy white tissue). There is a link between stem type and THC content.
  4. Pick males with tight, dense flowers and get rid of any with a loose and airy structure.
  5. Focus on males with the best odor.

2 – Use Male Cannabis Plants to Create Hemp Fiber

When it comes to creating hemp fiber, there is no better option than male plants. This is mainly because of their firm and fibrous stalks. Males provide soft and fine fibers capable of weaving the most delicate fabrics. Weaving might not be top of your list of hobbies! However, it is still cool to note that male plant fiber is the best option when making hemp products. Examples include tablecloths and clothing.

3 – Concentrate Production

Don’t assume that male plants are entirely devoid of THC. Males are indeed far less potent than females. However, they still have THC, and thus, can have psychoactive properties. Male plants don’t produce buds, the same flower buds, anyway. But you can find cannabinoids in their flowers, leaves, and stems. You can also benefit from a gentle buzz by drying and pressing the pollen you find in a male plant.

Incidentally, male plants have a higher THC concentration in their leaves than females during the vegetative growth phase. By the adult stages, females have taken over and produce a far higher THC ratio. The main issue with males is their limited lifespan. Also, there are no techniques available to delay pollination and boost resin production. Perhaps that will change one day. For now, extract the existing resin and create hash oil, BHO wax, dabs, or other concentrates.

All you need to know…

4 – Male Weed Plants Can Enhance Your Garden!

Did you know that farmers have used marijuana plants as ‘companions’ for garden vegetables for centuries? Male plants, like females, produce terpenes, the aromatic oils found in weed that account for the delightful scent and taste.

Terpenes, especially pinene and limonene, are also excellent for pest and disease control. With this in mind, you can introduce male plants in vegetable or flower gardens. Make sure they remain far away from female cannabis plants!

You can use dried material from male plants to create a terpene-laden oil. Use this oil to keep insects and other pests at bay.

In the old days, farmers would allow up to two vigorous male marijuana plants to grow. They knew to keep them well away from the females, and placed them at the far end of the garden. They also made sure that the plants were sheltered from the wind.

Next, they planted corn, sunflowers, or beans between the two plant genders and enjoyed healthy crops with a few seeds in them. There were just enough seeds to grow the following year’s crop without reducing that year’s THC content.

Also, cannabis plants have long taproots that can dive deep into the ground and break apart low standard soil. As a result, nutrients and moisture can infiltrate and improve quality. As a bonus, taproots keep the soil in place and ensure there are no issues with soil loss and nutrient run-off during spells of heavy rain.

5 – Delicious, Healthy, Nutritious THCA Juice

Have you ever tried raw cannabis juice? It appears as if the cannabolic acids (specifically THCA and CBDA) in weed juice have many benefits. Indeed, they provide many of the same benefits as marijuana consumed in other ways. Male plants have the same concentration of these potentially healthy juices as their female counterparts. Therefore, you can drink the juice, enjoy a dose of healthy cannabinoids, and not worry so much about getting high.

Final Thoughts on Male Cannabis Plants

Most marijuana growers throw away their male plants as a matter of course. We think you shouldn’t be so hasty. Females produce the buds that allow us to either get high or benefit from the apparent medical properties of weed. However, male plants are far from being useless.

As well as providing you with a healthy juice, males make for ideal garden companions. They are great for making clothes from hemp fiber, are necessary for breeding, and you can use them in concentrates.

Do you intend to benefit from one or more of the uses outlined above? If so, remember that cannabis pollen is capable of traveling a long way to fertilize a female. Make sure you keep your crop protected!