Growing Weed From Seed For Dummies

Learn all about growing weed for dummies. How to grow weed for beginners. Growing weed indoors, how to grow weed outdoors. Learn how to set up a grow room for marijuana, including adjusting the climate, air flow, grow lights, and watering and fertilization systems. Learn all about growing marijuana with Leafly's comprehensive guide, covering the plant, its life stages, what it needs to survive, and how to create an ideal environment for it to thrive.

Growing Weed For Dummies

Check out our growing weed for dummies guide for an in-depth look at how to grow cannabis for the first time. If you’re a complete gardening beginner, you can still learn how to grow weed fast and on a budget. All you need are the right tools and growing techniques to get your garden off the ground.

Setting-Up Your Cannabis Garden

Let’s start with the basics. In order to start your own cannabis garden, you’re going to need enough space to house 1 or more plants. This could be an unused closet, corner of the bedroom, garage, or backyard.

Outdoor Weed growing

Make sure to check your local ordinances to ensure you are legally allowed to grow outside. Most towns that do allow outside gardens require growers to keep them in an enclosed and secure space. A greenhouse is a great way to harness the power of the sun and maintain a slightly climate-controlled environment.

Indoor Weed Growing

If you’re growing indoors, you may benefit from a grow tent or grow box. These self-contained units can come with everything or most of what you need to grow weed. Make sure you choose a tent that can fit in your unused space and can house the amount of plants you want to grow.

In addition, consider the height of your plants. Will your grow tent be tall enough to accommodate them?

A hydroponic system is an alternative to the traditional soil-based method. Hydroponic gardens use an inert growing medium and nutrient-water solution to grow. These systems may be more expensive and complex than the simpler soil-based system.

Good Seed Makes a Good Weed Crop

Every cannabis plant starts from a seed. There are hundreds of variations you can choose from including feminized, regular, and autoflowering seeds. Each has a different growing requirement but feminized are easier to work with for beginners. Buy cannabis seeds from a licensed retailer or shop from online seed banks that ship to your location.

Cannabis Plant Container

Cannabis plants need to grow in an area that has enough space for its roots and has good drainage. Generally, a 5-gallon container/pot with drainage holes can do the trick. You may also use a similar sized and shaped container such as a bucket, fabric pot, etc. As long as it has the right drainage system, you won’t have issues with mold and root damage.

Buy cannabis grow tents and closets online.

Cannabis Growing Medium

Most new growers start off with a pre-made organic potting soil mix. This is an easy way to get started with a growing medium that has all the right nutrients for your plant. Organic nutrient sources include earthworm castings, compost, bat guano, and more.

Learn How To Grow Cannabis!

Ideally, shop for cannabis-specific potting soils in either a “bloom” or “grow” formula depending on the stage of growth. Each formula has a unique ratio of the most critical macronutrients: nitrogen (N), phosphorus (P) and Potassium (K). Avoid formulas with extended or slow-release nutrients since they can be tricky to work with for beginners.


Growing cannabis from seed requires an initial sprouting stage that can be accomplished in a few ways. One of the best and easiest ways to sprout your seed is using the damp paper towel method. Keeping your seed damp, covered, and cool can be accomplished with a couple of wet paper towels, some paper plates, and patience. Once your seed has sprouted its first green growth, you can transplant it into a larger container.

Bring the Light for Growing Weed

Once your seedling has grown its first leaves, it’s going to need plenty of light to keep the growth coming. During the first part of your plant’s growing process, it needs at least 18 hours of light a day. This can be accomplished with a simple fluorescent bulb or an LED lighting setup. Consistent and intense grow lights help it grow its roots, stems, and leaves.

Feed Up

During your plant’s growth cycle, you will need to ensure it has the right amount and quality of nutrients. Buying high-quality fertilizer made for cannabis plants is your best bet. You can also create your own nutrient mix as you gain more experience feeding cannabis plants.

The Vegetative Stage of Cannabis Plants

During the vegetative phase, your plant will require plenty of water and care. If the top 1 inch of your soil feels dry, water it. Otherwise, avoid over-watering to reduce the risk of mold and disease formation.

During the stage, maintain temperatures between 70 and 85º F. Make sure your vegetative plants get the right amount of fertilizer. Follow the nutrient brand’s directions or use one-third or one-half of the recommended dosage and moderate as you see fit.

The Flowering Stage of Cannabis Plants

After a certain amount of time or when the light cycle changes, your plants will begin their flowering stage. During the flowering stage, plants receive about 12 hours of light and 12 hours of darkness. Your plants will begin growing its resinous buds until the harvest season.

There are over 300,000 jobs in the cannabis industry. CTU trained me for one of them!

– Johanna Rose
Makes $24.50 @ THC +

Harvest, Dry, and Cure Weed

After all those months of waiting for your bud growth, it’s time to harvest your crop and refine the buds’ taste and aroma. First, you’re going to cut the bud branches from the plants and remove any excess foliage. You’ll need to hang the buds to dry in a cool, dark, and dry space. Check up on them every day to see if their stems are soft or firm and dry. When you can hear an audible snap from your branches when broken, it’s time to cure.

After the drying stage, the curing stage helps bring out the strain’s flavors and aroma. All you have to do is keep your buds in an airtight jar, preferably UV protected. Check back every day and open the jars to “burp” them for a few minutes and let the moisture evaporate. After a few weeks or months, your buds will have released the excess moisture and reached their peak freshness.

Master Grower Education

Growing weed is easier than ever, especially with a strong cannabis education. If you want to learn the ins-and-outs of growing huge yields and high-quality buds, enroll in Cannabis Training University’s online cannabis program. Learn from master growers how to grow indoors or outdoors on a budget. You don’t need super fancy equipment to get started on your new hobby or career. All you need is a small investment and a desire to learn.

*Some of the links in this article are affiliate links and if you click through them and make a purchase we may receive a commission. We thank you!

How to Grow Cannabis Indoors

In terms of temperature, remember this rule: No colder than 60, no hotter than 85, and never above 90.

Focus on air flow

  • Help to regulate heat and humidity: Grow lights kick out a lot of heat, which also increases the humidity in the grow room. An exhaust fan pulls hot and humid air out of the grow room, creating a vacuum that pulls in cooler, drier air (assuming the room has intake holes or vents).
  • Deliver CO2 to plants: Plants breathe in carbon dioxide (CO2) and breathe out oxygen (O2). Without proper ventilation, the CO2 supply in the room is depleted, and the plants “suffocate.”
  • Prevent pests and diseases: Warm, humid, stagnant air provides an ideal environment for mold, mildew, fungi, and certain pests. Pulling in cooler, drier air eliminates this problem, and having a breeze in the room helps to discourage infestations of small flying insects such as gnats.
  • Strengthen plant stalks and stems: Plants sense the breeze in the room and grow hardier as a result, which provides more support for buds during the flower stage.

Improper air flow in grow rooms is the number one reason for reduced yields and complete crop failure.

Ensure proper ventilation

The first order of business is to install one or two fans to ventilate the room — an exhaust fan, an intake fan, or both. With an active system, you have an exhaust fan on one end of the room and an intake fan of the same size on the opposite end. In a passive system, you use only one fan. As the exhaust fan pulls air out of the room or the intake fan pushes air into the room, air flows in or out through one or more holes on the opposite end of the room. In passive systems, the hole (or holes) without the fan must be larger than the hole with the fan.

See also  Alligator Weed Seeds

Most grow rooms use in-line duct fans, which are very easy to install. Installation is similar to connecting a flexible duct pipe to a clothes dryer. You can buy 4-, 6-, or 8-inch diameter in-line duct fans depending on the size of the room and the size of any existing holes. Six-inch fans are common. If you have a grow tent, check the size of the exhaust and intake holes and buy fans to match.

Also check the cubic feet per minute (CFM) rating of the fan(s) and buy a fan with a CFM rating that’s higher than the volume of the room in cubic feet. The general idea is that you want sufficient ventilation to completely replace the air in the grow room once every minute. Simply measure the room’s length, width, and height in feet and multiply the three numbers. For example, if the room is 3-by-3-by-6 feet, 3 × 3 × 6 = 54 cubic feet, so a fan with a rating of 100 CFM would be sufficient. However, you may need a fan with a higher CFM rating if you’re pumping the air over a long distance or have one or more bends in the duct pipe.

Your intake hole should be near the bottom at one end of the room with the exhaust hole at the top of the opposite end of the room. The exhaust hole is higher, because heat naturally rises to the top.

Whether you use one or two fans, install a filter on the intake and exhaust ducts. The intake filter keeps out bugs, mold spores, dust, and other contaminants. The exhaust filter is usually a carbon filter that helps to reduce the odors from the cannabis exiting the room. You attach the filters directly to the fans or use a piece of flexible duct pipe between the fan and filter.

Use as little duct pipe as necessary and run it as straight as possible. The longer the distance the air has to travel and the more bends in the pipe, the less efficient the air flow. If you must run pipe a long distance or add a bend, consider buying fans with higher CFM ratings.

Circulate the air

Air circulation is also important. Plants don’t “exhale” with any type of force during respiration. Fans used to circulate the air move the O2 surrounding the plants and replace it with CO2 that the plants can “breathe in.” You need one or more fans inside your grow room to maintain proper circulation. Deciding on the number of fans and positioning them in the room is mostly a process of trial and error. The goal is to have all parts of all plants “dancing” — all the leaves should be shaking gently. If you notice any part of any plant that’s not dancing, you may need to reposition the fan(s) or add a fan.

Start with two small fans in opposite corners of the room or one slightly larger oscillating fan in one corner of the room and make adjustments from there.

Supply carbon dioxide

Plants require CO2 to survive. This is the symbiotic relationship plants have with animals. Animals breath in O2 and exhale CO2; plants “inhale” CO2 and “exhale” O2. If your grow room has adequate air flow, CO2 sublimation isn’t necessary, but it increases overall yields if you’re using higher intensity lighting.

Several methods are available for adding CO2 to a grow room. You can buy a tank of CO2 and simply pump it into the room, allow dry ice to melt inside the room, or buy CO2 canisters or bags that release the gas slowly into the room over a period of time. If you’re adding CO2 to your grow room, keep the following important points in mind:

  • Add CO2 only when the lights are on. When the lights are off, plants slow down their use of CO2 considerably, so any CO2 added is CO2
  • Turn off the intake and exhaust fans for a few minutes when releasing CO2; otherwise, you’re pumping out the gas, and wasting it.
  • Add CO2 from the top of the room and in front of one of your circulating fans. It’s denser than air, so it tends to drop toward the floor. For example, if you’re using a CO2 tank, run a hose to near the top of the grow room and lower it so it’s in front of one of the fans.
  • Maintain a level of 900 parts per million (ppm) of CO2 during the vegetative stage and 1,150 ppm during the flower stage. You’ll need a CO2 meter to monitor CO2

Additional CO2 is necessary with higher light intensity, enabling the plant to take advantage of the added light with greater photosynthesis.

Set up grow lights

Lighting is a key factor in a successful indoor grow operation. The types of lights, the way you set them up, and other pieces that control and direct them are the keys to your yield and the flavor of your end product. Here, we guide you through the process of choosing and installing your grow lights.

Calculate your lighting needs

Before you head out to your local nursery or hardware store to shop for grow lights figure out how much light you need. In general, a standard 1,000 watt grow light will cover four plants that have a fully grown diameter of about 3 feet, depending on strain. If you set up your grow lights and plants and notice that some parts of one or more plants aren’t receiving light, you’ll need to add one or more lights.

Choose light fixtures and bulbs

Most standard household light fixtures and bulbs are insufficient for growing cannabis. They don’t provide the intensity and quality of light the plants need for optimal growth. The exception is fluorescent lights (typically T5s) or compact fluorescent lights (CFLs), which are okay, but result in smaller, lower-quality buds. We don’t recommend fluorescent lighting.

After ruling out fluorescent lighting, your choice of grow lights depends on your goal and the stage of growth:

  • If your goal is high yields, choose a high intensity discharge (HID) bulb — metal-halide (MH) for the vegetative stage and high-pressure sodium (HPS) during the flower stage. These bulbs emit a lot of light and a lot of heat, so you need to position them at a greater distance from the plants.
  • If you’re looking for better terpene yields for extraction, use light-emitting diode (LED) or ceramic metal halide (CMH) bulbs, because these preserve the terpenes without bulking up the flower weight and density the way high-intensity discharge (HID) lighting does.
  • Fixture with reflector hood: The fixture holds the bulbs, and the reflector hood directs the light down to the plants. Reflector hoods come in different types:
  • Closed hood: Shaped like a box, a closed hood reflector creates a more focused beam of light (and heat).
  • Vented hood: Similar to a closed hood reflector but with openings on the ends for connecting the hood to in-line duct fans for cooling.
  • Wing: Typically a curved and textured aluminum sheet that provides a less focused beam of light than a closed hood reflector. The light covers a greater area but is less intense (so is the heat).
  • Parabolic: Shaped like an umbrella, a parabolic hood distributes light like a wing but in a more circular pattern.

Your choice of hoods is a personal preference. Go with a closed hood if you’re concerned about heat or with an wing or parabolic if you’re not.

  • Ballast: The ballast provides control over the current that the lightbulb draws from the power source. The following two types of ballasts are most common:
  • Magnetic: Less expensive, heavy, hot, potentially noisy, susceptible to flicker, and supports only bulbs of a certain wattage. If you want to change from a 400W bulb to a 600W bulb, for example, you need to replace the ballast.
  • Digital: More expensive, smaller, lighter, cooler, quieter, less susceptible to flicker, more efficient, may be equipped with a dimmable option, may cause radio frequency interference.
  • Hooks and pulleys: Grow light systems often include hooks and pulleys for hanging the light fixtures in your grow room. Pulleys enable you to more easily raise and lower the light fixtures to place them at the right distance from the tops of the plants.
  • Timer: Grow light systems typically come with a timer, or you can purchase a timer separately, which automates the process of cycling the lights on and off on schedule.
See also  How To Make Weed Tea With Stems And Seeds

Mount your light fixtures

Mount the light fixtures to the ceiling of the grow room above the plants, positioning the fixtures to ensure equal distribution of light over the entire canopy. How you mount the light fixtures depends on the fixture and how your grow room ceiling is configured. Using hooks, ropes, or chains and possibly pulleys, you can hang your fixtures in a way that you can easily raise and lower them to the proper distance from the tops of your plants.

Position the lights above the plants, so all parts of all plants are receiving light. The light should be as close to the top of the tallest plant as possible without burning it. Keep a close eye on the plants whenever adjusting the lights, and if the top of any plant is getting burned, raise the light.

Don’t place anything flammable close enough to the light that there’s any possibility the light will ignite it.

Set and reset timers

During the vegetative stage, plants require 18 to 24 hours of light. During the bloom/flower stage, they need 10 to 12 hours of light and at least 12 hours of total darkness (for photoperiod strains); auto-flowering strains will flower without 12 hours of darkness. Putting your grow lights on timers greatly simplifies the process of managing the required light/dark cycles, but you still need to manage the changes in lighting over the growth cycle.

If you plan to have a continuous garden with some plants in veg and some in bloom, set up your lighting differently in those two areas. For photoperiod strains, use a separate grow tent or grow room for plants that are in the vegetative stage and those that are in the flower stage.

  1. Position the lights at the proper distance above the canopy for the vegetative stage.
  2. Adjust your light timer(s) to provide 18 to 24 hours of light. Experiment with different settings in that range over several grows to find the optimum amount of light for each strain you grow.
  3. Keep an eye on your plants, adjusting the lighting as necessary to keep the lights the proper distance from the tops of the plants as they grow taller.

When your plants are about half the size of full-grown plants, they’re ready to switch from the vegetative to the flower stage. (At this point, you either adjust the lighting, as explained in the remaining steps or move the plants to the flower tent or room.)

The size of a full-grown plant is strain dependent and impacted by light, container size, and other environmental influencers such as CO2. You may have to go through several rounds of growing a particular strain to develop a clear idea what the size of a full-grown plant is and when the plant is ready to switch from the vegetative to the flower stage.

You don’t need to change out fluorescent, CFL, or LED bulbs.

When changing to the brighter HPS bulbs, shade the plants for a couple days to prevent them from getting blasted by the more intense light. You can place a piece of cardboard between the light and the plants to serve this purpose, but make sure it’s as far as possible from the light to prevent a fire.

Measure the light

Light intensity has a big impact on yield. All parts of all plants should have exposure to the light, and the lights should be as close to the plants as possible without burning them. If the top of any plants are wilting or burnt from the light, raise the lights.

For more sophisticated grows, obtain a photosynthetic active radiation (PAR) meter and take measurements at several different locations above the canopy to measure the PAR output of the lights. The PAR measure should never rise above 1,200 PAR.

Decide on a watering/fertilizing system

Whether you’re growing indoors or outdoors, you need to decide on a system for watering and fertilizing your plants. You basically have two options: manual and automatic. During your first grows, we recommend the manual method as you develop a sense of how much water and fertilizer your plants generally need.

After developing an understanding of your plants’ water and nutrient needs (which may vary depending on the strain), consider installing an automated irrigation system. These systems are equipped with timers that water and feed plants automatically on a pre-set schedule. They provide the same benefits of lighting systems — the convenience and reliability of automation. However, you still need to monitor your plants to be sure they’re getting enough and not too much water and nutrients.

Use a hydroponics system

  • Aeroponic: Plants sit in a tray above a water/nutrient reservoir with their roots dangling down. Solution from the reservoir is sprayed up onto the roots at regular intervals, and excess solution drips down into the reservoir.
  • Drip: Nutrient-rich water is dripped slowly at regular intervals into the grow medium where the roots can absorb it. Unused water drains back to the reservoir to be reused or to a waste reservoir and then discarded.
  • Deep water culture (DWC): Plants sit in baskets above an aerated (and typically chilled) water/nutrient reservoir with their roots submerged in the solution, which allows for continuous feeding.
  • Ebb and flow: Plants sit in pots in a grow tray. Nutrient-rich water is pumped into the grow tray at regular intervals and flows into holes at the bottom and sides of the pots. The pumping stops and water is allowed to drain back into the reservoir from which it was pumped.
  • Nutrient film technique (NFT): NFT is like a cross between DWC and ebb and flow. Plants sit in baskets above a grow tray. Nutrient-rich water is continuously pumped from a reservoir into the grow tray and then drains from the opposite end of the grow tray back into the reservoir. This arrangement delivers a continuous flow of nutrient-rich water to the roots.
  • Wick: A plant sits in a container above an aerated, nutrient-rich water reservoir, and a rope or other absorbent material (such as felt) is placed through the middle of the growth medium and into the reservoir. Through capillary action, the solution from the reservoir “climbs” the rope, providing the plant with as much or as little water and nutrients as it demands.

Here are a few suggestions for increasing your odds of a successful hydroponics grow:

  • Disinfect all your hydroponics equipment with isopropyl alcohol or bleach between grows to kill off any bacteria or other infectious agents. Anaerobic bacteria can build up in dirty systems and kill your plants from the roots up.
  • Use clean, pH neutral water. Water from a reverse osmosis (RO) system or distilled water is suitable.
  • Aerate the nutrient-rich water solution. You can place an aeration stone in the bottom of the reservoir attached to a small air pump like those carried by local pet stores. Without aeration, your plants may not receive the oxygen they need.
  • Replace the water/nutrient solution every couple weeks. Don’t merely add nutrients, because nutrient concentrations may become too high as a result. (Remember to use a fertilizer with a higher nitrogen concentration during the vegetative stage and higher potassium and phosphorous during the flower stage.)
  • After dumping the old nutrient solution, run a dilute water and hydrogen peroxide solution through the system to clear out any infectious agents and then rinse with plain water.
  • Consider flushing the grow medium with plain water whenever you change the nutrient solution.

When choosing and setting up a hydroponics system, research to find out the type of system that’s best for your grow space and skill level. Simpler is usually better. Use high quality food grade plastics in your system and make sure it’s leak free before starting your grow.

Keep your grow room impeccably clean

  • After each use, wash and disinfect plant containers, grow trays, irrigation hoses, and pumps. Use soap and water followed by isopropyl alcohol or a bleach solution (one part bleach to three parts water). Then, carefully rinse everything with plain water.
  • Keep your grow room free of any dead plant mater and debris. This is where many pests and pathogens can get a foothold in a garden of healthy plants.
  • Watch for common pests such as aphids, fungus gnats, spider mites, and thrips. If you see even one of these nasty critters, identify it and find an effective pesticide. This is where your friendly garden store or grow store staff comes in handy.

About This Article

This article is from the book:

About the book authors:

Kim Ronkin Casey has been a communications professional for more than 20 years and recently took a year-long leap into the world of cannabis as the communications manager for one of the leading dispensaries in North America. She now consults for companies in the industry on internal and external communications. Joe Kraynak is a professional writer who has contributed to numerous For Dummies books.

Leafly’s guide to growing marijuana

Growing weed is super easy—it’s called “weed” for a reason—so don’t worry if you haven’t grown anything before. Our clear, easy-to-digest guide will help growers of all kinds, especially first-time ones.

Whether indoors or outdoors, growing marijuana is fun and rewarding, but it can also be challenging and takes a certain amount of patience, time, and money. We’ll walk you through all the steps of growing, from preparation, to seed germination, plant growth, and harvesting, as well as best practices and how to troubleshoot common problems.

Because the plant was illegal for so long, a lot of grow info has been passed down by word of mouth. There are many myths and traditions about growing weed, so it can be hard to sort good, sound advice from hearsay. Also, because it was illegal, there’s ample information on indoor growing and how to get the most out of a small space by maximizing harvests and training plants.

These are all great resources but not all growers want to put in that amount of time and effort to get a ton of weed—some growers just want to have fun, grow a little weed, and smoke something they grew themselves.

Below are all the topics covered in our growing guide. That is followed by a list of where it’s legal to homegrow in the US and a quick overview of the growing process.

Enjoy, have fun, and learn a tip or two—growing weed is therapeutic and relaxing, and there’s nothing better than smoking weed you’ve grown yourself.

Leafly’s complete marijuana growing guide

Where is it legal to homegrow cannabis?

Before you get started growing, you’ll need to see if you even can grow in your state. Below is a list of states in which it is legal to grow your own marijuana at home, both states with medical and adult-use legal status. If your state does not appear on this list, it is not legal to homegrow in your state .

You might be surprised which states don’t allow homegrowing—only five medical states and one medical territory allow homegrowing at all, and some adult-use states require a medical card.

Check out our Guide to marijuana legalization for more details on homegrowing in your state.

Note that “mature” plants are those in the flowering stage, when plants begin to produce buds; “immature” plants are those in the vegetative stage, before they produce buds. A “household” is defined as two or more people living at a single residence.

State Legalization status Legal to homegrow? How many plants?
Alaska Adult use Yes 6 (3 mature, 3 immature)
Arizona Adult use Yes 6
California Adult use Yes 6
Colorado Adult use Yes 6 (3 mature, 3 immature); 12 per household
Connecticut Adult use Yes 6 (3 mature, 3 immature)
Hawaii Medical w/ medical card 10
Illinois* Adult use w/ medical card 5
Maine Adult use Yes 15 (3 mature, 12 immature, plus unlimited seedlings)
Massachusetts Adult use Yes 6; 12 per household
Michigan Adult use Yes 12
Missouri Medical w/ medical card 6
Montana Adult use Yes 8 (4 mature, 4 immature)
Nevada Adult use Yes 6; 12 per household
New Jersey Adult use Yes 6; 12 per household; medical: 10
New Mexico Adult use Yes 6; 12 per household; medical: 16 (4 mature, 12 immature)
New York Adult use Yes (pending) NY is currently setting up a framework for homegrowing; adults will be able to grow 6 plants individually and 12 per household when it takes effect
North Dakota Medical w/ medical card 8
Oklahoma Medical w/ medical card 12 (6 mature, 6 immature)
Oregon Adult use Yes 4; medical: 6
Rhode Island Adult use Yes 3; medical: 24 (12 mature, 12 immature)
South Dakota Adult use Yes 3; 6 per household (starting 7/1/2021)
Virginia Adult use Yes (pending) Virginians will be able to homegrow 4 plants per household beginning July 1, 2021
Vermont Adult use Yes 6 (2 mature, 4 immature)
Washington* Adult use w/ medical card 4 (up to 15 if given authorization from healthcare practitioner)
Washington, DC Adult use Yes 6 (3 mature, 3 immature); 12 per household (6 mature, 6 immature)
Guam Adult use Yes 6 (3 mature, 3 immature); medical: 18 (6 mature, 12 immature)
US Virgin Islands Medical w/ medical card 12

*Illinois and Washington are adult-use states but require a medical card to homegrow.

Quick overview of the basics of growing marijuana

The best way to get quality buds and big yields is to grow strong, healthy plants. Here’s a quick rundown of the most important things you need to know about growing weed:

  • Cannabis is a warm-season annual—it thrives in temperate climates, such as Northern California’s famed Emerald Triangle, and it grows and dies each year, having to get planted again the following year.
  • It will take about 10-32 weeks to grow a weed plant, depending on the method you choose and how big you want plants to get.
  • Before you start growing, you’ll have to determine whether you want to grow indoors or outdoors (more below). You can grow weed pretty much anywhere—it just depends what space, equipment, and resources you have available.
  • Marijuana plants start out as either a seed or a clone. Seeds will need to germinate to grow into a seedling. A clone is a cutting taken off a weed plant that you can then grow into another plant, and it will have the same genetic makeup.
  • After the seedling stage, a weed plant enters the vegetative stage, which is generally the longest stage of its life. Here the plant will be a main stalk, branches, and fan leaves—no buds yet.
  • The magic happens during the flowering stage, when weed plants start to grow buds. Plants enter this stage about two months before harvesting.
  • At harvest, you’ll cut down your plants, trim, dry, and cure them, and then your homegrown buds will finally be ready to smoke.

What does a marijuana plant need to survive and thrive?

  • Light: Weed is a photoperiod plant, meaning the daily amount of light it receives will determine when it flowers—when it starts to produce buds. Outdoors, this happens when the daily amount of light reduces as summer turns to fall, and indoors, growers can control this by changing artificial light from 18 to 12 hours a day.
  • Water: Weed plants of course need water, and the amount of water they need will change as they grow, and also depends on your local climate and weather.
  • Nutrients: Weed plants need nutrients so they can grow strong and be healthy.
  • Temperature and humidity: You’ll need to provide an environment with optimal temperature and humidity that will allow weed to thrive. Generally, this is between 55-85°F, with a relative humidity between 50-70%.
  • Wind/airflow: Weed plants also need wind or airflow, which you can simulate indoors with fans, and which will occur naturally outdoors.

Indoor vs. outdoor marijuana growing

Your homegrowing journey starts with the question: indoors or outdoors?

Growing outdoors is the cheapest and easiest way to grow, because you can utilize the power of the sun and other natural resources, but you need the proper space to do it, and the space needs to be able to get ample sunlight throughout the growing season. Often, you can let plants grow large and get big yields with more space outdoors.

Growing weed indoors is more expensive because you’ll need to spend money on equipment and utilities, but you can control every aspect of the grow environment and set up an indoor grow almost anywhere. Expect to grow some killer weed—indoor is known for its potency and quality.

How to choose a marijuana strain to grow

At the end of the day, you want to grow a strain you like. A single plant can yield between a half-pound and a full pound of dried buds, depending on how big your plants get, so you’ll have a lot of it come harvest time.

The last thing you want is to put a ton of time and effort into growing weed and end up with a strain that you don’t like. Everyone has different tastes and preferences, and strains affect people differently.

See also  Weed Seed Tea