How Long After Scotts Weed And Feed Can I Seed

ILGM

Buy Cannabis Seeds Online

Overseed your lawn in the fall after killing weeds in late summer. If you’re late, scalp the weedy lawn, rake away all the debris, and spread grass seed. Some weeds will germinate and grow with the grass, but you can control them using a post-emergent herbicide before they spread further. If you want to prevent crabgrass, kill all the weeds you see (and those you don't), and fertilize your lawn, then you may have been recommended Scotts Turf Do not apply to newly seeded or sodded areas until after the 4th mowing. Do not seed, sod, rake, or…

Overseeding a Lawn with Weeds: Should You Kill Weeds First?

A lawn full of weeds can become even more problematic if you don’t overseed the right way. Overseeding is meant to renew your lawn, fill in any bare spots, and make the turf dense. But, when your lawn is full of weeds, should you go ahead and overseed without killing weeds first?

Overseed your lawn in the fall after killing weeds in late summer. If you’re late, scalp the weedy lawn, rake away all the debris, and spread grass seed. Some weeds will germinate and grow with the grass, but you can control them using a post-emergent herbicide before they spread further.

It is not a good idea to plant and grow new grass over weeds because weeds compete for nutrients and water in the soil, which leads to poor germination and growth of the newly planted grass.

I invite you to join our Lawn Care Group where we all interact, ask, and answer peer questions.

Should I Kill Weeds Before Overseeding?

Kill and remove weeds from your lawn at least 6 weeks before overseeding if you’re using a post-emergent herbicide. Alternatively, remove weeds by hand-pulling manually. Weed killers will affect the seed germination, so, allow enough time as indicated on the product label before planting grass seed.

Since the best time to overseed most lawns is fall, late summer is a good time to put down a post-emergent weed killer. By the time fall comes, it will be at least 4-6 weeks since you applied a weed killer, which is safe for planting grass seed.

How to Overseed a Weedy Lawn

It is best to kill weeds first before overseeding.

Weeds like bare spots and can continue to spread and invade your lawn if you don’t do anything about them. That’s why overseeding helps control them by making your lawn thicker and fuller, and able to choke out weeds.

Overseeding is time and cost-effective, as you don’t have to till and tear apart your lawn. Instead, you’re breathing life back by adding more grass seeds on top of an existing lawn. If done right, this technique lets you grow enough lush lawn that fills in the bare or thin patches in your yard, leaving no room for weeds to grow.

Here’s how to overseed a lawn with weeds:

1. Pull out the weeds manually

Remove weeds from your lawn manually using a weed puller. Pulling weeds out by hand is highly recommended especially if the weeds are grown and visible. Do not apply herbicides on your lawn before overseeding as this can cause poor germination of grass seed.

If you prefer using a weed killer before overseeding, do so early enough to allow time for the herbicide to break down completely before spreading grass seed. Most pre-emergents and post-emergent herbicides have indicated waiting periods before you plant grass seed.

Here’s how to pull out weeds by hand:

  • Water your lawn deeply to make the soil soft.
  • Pull out weeds by hand or using a weed puller.
  • Throw the weeds away from your yard.

In some cases, you may not need to apply a weed killer as weeds like crabgrass usually die off as the weather becomes cooler. If you have annual weeds, just overseed your lawn with weeds late in the fall and allow the new grass to grow. By the time spring comes, your lawn will grow thick and full enough to choke most annual grassy weeds.

2. Mow the lawn on the lowest setting

Set your mower to the lowest setting possible in order to scalp the lawn you want to overseed. Scalping your lawn helps improve the seed-to-soil contact that in turn improves the rate of seed germination. Set your lawn mower’s deck as low as possible – though any setting between 1.5 and 2 inches would be a good option to consider if the lawn does not have too many weeds.

  • If your lawn is level, you can set the mowing deck as low as 1 inch from the ground.
  • If your lawn is bumpy, set the blades a little higher – up to 2 inches to prevent damaging the blades.

Pro tip: Always bag clippings if your lawn has weeds that have gone to seed to prevent spreading weed seeds all over your yard and worsening the problem.

See also  Marijuana Seeds For Sale Tucson

It is also a good idea, in my experience, to mow right before the rainy week to keep the lawn moist. It makes my mowing job a lot easier as the grass is soft and the thatch easy to remove right before overseeding weedy lawns.

3. Remove grass clippings

Use a rake to remove grass clippings and other debris that’s covering the soil. The process of raking also helps loosen up the top soil in your yard.

If you mowed a little higher, you might have a lot of thatch remaining on the soil surface. Use a heavy duty rake to remove any debris that can prevent your grass seed from staying in contact with the soil for germination.

A good rake can also help you remove any moss that may be growing under the grass in your lawn.

4. Dethatch the lawn

A thick layer of thatch can also cause seed to soil contact problems. Use a dethatcher to break down the thick thatch and then collect the loosened-up trash bag and throw it away on your compost.

Alternatively, run a power rake all over the weedy lawn to loosen up any thatch and tangled-up grass.

When I have a large weedy lawn to overseed, I find it helpful to rent a slit seeder to complete the task in the shortest time possible.

5. Aerate the lawn

By the time it is fall, the soil is usually compacted already, which is why the grass in your yard is growing slowly while the weeds grow faster. After removing the weeds, mowing, and dethatching, core aerate the lawn to allow air, water, and nutrients to be easily accessed in the root zone.

The cores created in the yard will also allow for better seed-to-soil contact as soon as you overseed. This process is better than just sprinkling grass all over the lawn because it improves the rate of seed germination.

6: Spread the grass Seed

Spread grass seed over the prepared area using a lawn spreader. Follow the recommended spreader settings for the type and variety of grass seed you’re overseeding your lawn with to ensure you’ve put down enough make your turf thick and full the next season.

Pro tip: Spread a thin layer of straw to cover grass seed and prevent birds from causing damage. You can also use bird deterrents if you don’t want to cover the grass seed.

For the best results, plant one-half of the grass seeds in one direction and the other half in the opposite direction. I recommend using a lawn spreader for even distribution of the seeds.

Also, you need to make sure the seeds have a good contact with the soil because this helps with proper germination and enhances growth. You can use a water-filled roller or the back of metal rake to establish the recommended contact between the soil and your grass seeds.

7. Gently rake in the grass seed

Raking is important as it helps the seeds come into contact with the soil to germinate properly. If you used a spreader or simply broadcast the seeds with your hand, the grass seed isn’t in proper contact with the soil.

Lightly rake in the seed over the overseeded area to improve contact and promote faster germination. Raking will also prevent water from washing away seeds in your lawn when you irrigate.

8. Water your overseeded lawn lightly

Water the overseeded area lightly to keep the soil moist enough for the grass seeds to germinate and grow. Do not use a heavy sprinkler because it can easily erode the seeds away from the desired area.

Here’s a video on how to prepare and overseed a lawn with weeds:

How to Control Weeds after Overseeding

Weeds may sprout in your lawn soon after your grass seed starts to germinate. At this time, do not apply herbicides yet. Applying herbicides too soon can kill or weaken the young grass shoots.

Wait until the roots have established and the crown matured enough to withstand the strength and effect of the chemicals.

Also, instead of using equipment such as a power rake, which disrupts lawn surfaces, use less disruptive tools such as a hand rake, as they cause less disruption and don’t leave bare patches on the lawn.

Overseed your lawn at the right time to reduce weed competition and enhance the dramatic, successful growth of the overseeding process. You can overseed cool season turf grasses between mid-August and mid-September as a way to fix a weedy yard. These are favorable times for their germination and establishment.

Can I overseed after weed and feed?

It is not recommended to overseed your lawn after applying weed and feed fertilizer. This type of lawn food contains herbicides that can inhibit germination of both grass and weed seeds. If you’ve just put down weed and feed, wait at least 6 weeks before sowing grass seed.

See also  Cannabis Seeds Colorado

Read the weed and feed product label for the recommended time to wait before reseeding your lawn. Follow the instructions to ensure you achieve a high germination rate when overseeding a weedy yard.

While fall is the perfect time to overseed your lawn and encourage weed control, there are other seasons to overseed provided you understand the risks.

You can overseed in the early spring, but make sure the lawn is well drained for the best results. Weed competition is more progressive and intense as spring progresses. So unless you time the overseeding period before weed germination in spring, doing so at this time may not be effective.

Summer is the least desirable time to overseed your lawn especially if it has weeds. In early summer, the conditions are so hot that there’s a huge demand for irrigation for proper overseeding to be possible. This is also the time when broadleaf weeds tend to thrive, and therefore your overseeding efforts are likely to fail.

Overseeding will make your lawn fuller, and thicker; and improve its pest, disease, and weed resistance. Remember, care for and maintain your lawn after reviving its look and density. Some tips include sufficient watering, proper fertilization, consistent weeding, foot traffic control, and proper mowing.

When Can I Seed After Using Scotts Triple Action?

If you want to prevent crabgrass, kill all the weeds you see (and those you don’t), and fertilize your lawn, then you may have been recommended Scotts Turf Builder Triple Action.

This 3-in-1 formula is a favorite among every homeowner and gardener that I know.

And while there are instructions on the bag, there is one thing that is not clear for most users.

The question is how soon can you seed after applying Scotts Turf Builder Triple Action?

You must wait 4 months after using Scotts Triple Action before seeding, according to Scotts.

Keep reading to learn more.

Table of Contents

How To Use Scotts Turf Builder Triple Action

The best time to apply Scotts Triple Action to your lawn is before you start seeing that annoying crabgrass sprouting up.

Or, after you start to notice dandelions appearing on your lawn.

However, you must wait until the outdoor temperature is ideal.

For application in the spring, you should apply Scotts Triple Action when the temperature is between 60F and 80F.

The lawn MUST be went from dew or watering before applying Scotts Triple Action to help the particles adhere to weed leaves.

After 24 hours have passed, you need to water the lawn to wash particles onto the soil.

Do not allow people and pets to re-enter the treated area until dusts have settled.

For best results, apply using a Scotts spreader.

Be sure to apply before the 3rd or 4th mowing of the year.

A fall application may be made to control fall-germinating winter weeds and cool season perennial weeds such as dandelion and clover.

On Bahiagrass and Centipedegrass lawns, wait until after the 2nd mowing of the year but DO NOT treat before mid-March.

In the fall, DO NOT treat Centipedegrass after the 1st of October and DO NOT treat Bahiagrass after the 1st of November.

Note that Scotts Turf Builder Triple Action is designed for use on Kentucky Bluegrass, Perennial Ryegrass, Tall and Fine Fescue, Bermudagrass, Centipedegrass, Bahiagrass, and Zoysiagrass.

WHERE NOT TO USE
– Do not apply to newly seeded or sodded areas until after the 4th mowing.
– Do not seed, sod, rake or aerate for 4 months after application.
– Wait 5 months before applying the product on newly sprigged areas.

How Often To Apply Scotts Turf Builder Triple Action

Do not apply Scotts Turf Builder Triple Action to your lawn more than twice a year.

Be sure to allow at least 2 months between applications of this product.

Potential Problems Using Scotts Turf Builder Triple Action

You should know that there is the potential for problems when applying Scotts Turf Builder Triple Action to your lawn.

Under certain conditions, temporary discoloration may occur on Bermudagrass, Bahiagrass, Centipedegrass, and Zoysiagrass lawns.

Do not use on St. Augustinegrass (including Floratam), Dichondra, Lippa, Carpetgrass, or Bentgrass because it is not designed for that purpose.

To protect the environment, do not allow product to enter or run off into storm drains, gutters, sewers or drainage ditches.

Also note that after application, new weeds will sprout up white.

Bleaching like this is common and goes away after the first couple of cuts.

About Scotts Turf Builder Triple Action

Scotts Turf Builder Triple Action provides three benefits in one bag.

This 3-in-1 formula kills and prevents weeds, all while feeding and strengthening your lawn.

It kills broadleaf weeds, including dandelions and clover, and prevents crabgrass for up to 4 months.

See also  99 Problems Weed Seeds

It also prevents other listed grassy weeds, including barnyardgrass, fall panicum, foxtail, and annual bluegrass.

Scotts Turf Builder Triple Action can be applied to Kentucky Bluegrass, Perennial Ryegrass, Tall Fescue, Fine Fescue, Bermudagrass, Bahiagrass, Centipedegrass, and Zoysiagrass.

Final Word

As you can see, you should wait 4 months to seed after applying Scotts Triple Action to your lawn.

You should not apply to newly seeded or sodded areas until after the fourth mowing.

And, wait five months before applying the product on newly sprigged areas.

How soon after Scotts triple action can I seed?

Good Answer! Do not apply to newly seeded or sodded areas until after the 4th mowing. Do not seed, sod, rake, or aerate for 4 months after application. Wait 5 months before applying the product on newly sprigged areas.

Can I seed after using Scotts Turf Builder Triple Action?

Can i sow grass seeds right after i apply triple action on the lawn? Answer: If applying Scotts Turf Builder Triple Action first, wait four months before applying seed or sod. If applying seed or sod first, wait until the new grass has been mowed four times before applying Scotts Turf Builder Triple Action.

How long after applying Turf Builder Can I plant grass seed?

While the company’s website recommends waiting four weeks to put down grass seed after applying the weed and feed, seeding first means waiting a different length of time before you use the product.

What do I use after Scotts triple action?

Then, 6 to 8 weeks after using Triple Action, apply Scotts® Turf Builder® Lawn Food according to label directions to continue giving your lawn the nutrition it needs to keep growing strong. If you live in the South: Southerners have particular challenges with lawn management.

How long do you wait to seed after pre emergent?

7 to 10 daysFollow these instructions: After your 1st application of the year wait at least 7 to 10 days before doing any renovation of the lawn or seeding. Rake through those bare spots and turn over the dirt to break up the pre-emergent compounds.

Can I fertilize and seed at the same time?

When seeding a lawn, you should never apply the fertilizer and seed together. This can cause an uneven distribution of the materials resulting in patchy areas or seedlings burned by excess fertilizer. It is best to spread the fertilizer just prior to planting the seed.

What month is best to put grass seed down?

Plant cool-season grass seed in late summer or early fall (when daytime temperatures lower to about 60 to 75 degrees) for best success. September is typically the best month, although you might be able to get away with seeding as early as mid-August or as late as mid-October; it all depends on the forecast.

Will Scotts Triple Action grow new grass?

Scotts® Turf Builder® Triple Action Built For Seeding is formulated to help grow new grass and control against weeds while feeding and strengthening grass. Now you don’t have to choose how to best care for your lawn—you can maximize growth with one application.

Can you overseed with Scotts Turf Builder?

If you’re using grass seed to overseed your lawn instead of Scotts® Turf Builder® Thick’R Lawn™, it’s a good idea to rake in a thin, 0.25-inch layer of enriched soil over your lawn to help the seed settle in. Scotts® Turf Builder® LawnSoil™ works well for this purpose.

Can you seed with Scotts Turf Builder?

For best results, add a thin layer of Scotts® Turf Builder® LawnSoil™ before applying seed. Apply using a Scotts® spreader. Lightly rake the seed into the soil. For best results, apply Scotts® Turf Builder® Starter® Food for New Grass.

Can I fertilize my lawn every 2 weeks?

Can I fertilize my lawn every 2 weeks? To avoid over-fertilizing, applying a fertilizer every two weeks is not recommended. Fertilizing as often as every two weeks will likely lead to problems such as lawn burn, excessive grass growth, as well as polluted water that can lead to toxic algae growth.

How often apply Scotts triple action?

Do not apply this product more than twice a year. Allow at least a 4-month interval between applications of this product. A fall application may be made to control fall-germinating winter weeds and cool season perennial weeds such as dandelion and clover.

Is Scotts Turf Builder triple action safe for dogs?

Answer: Scotts Turf Builder Weed and Feed 3 is safe for pets when it is used according to the product label. Once the treated areas dry completely, chewing or eating grass will not be harmful and your pet can resume normal activity within the area.

How useful was this post?

Click on a star to rate it!

Average rating 5 / 5. Vote count: 1

No votes so far! Be the first to rate this post.