Learn How To Germinate Cannabis Seeds in Rock-wool Cubes for Hydroponics Today on Cannabasics #115 Gear from video on Amazon: https://www.amazon.com/shop/ruffhousestudios?listId=PJ2A6JYQSUWJ (Paid Affiliate Links Help Support RuffHouse Studios!) Seed Vault: https://www.cannabis-seeds-store.co.uk/ How To Start From Seed With Rockwool Cubes In this lesson, we will learn how to start your own seed with Rockwool Cubes. Below is a detailed guide to success with Rockwool, and a step-by-step Rockwool cubes are a hydroponic growing medium often used to propagate plant cuttings, start seedlings, and clone. Learn about how this hydroponic media is used by growers.
How To Germinate Cannabis Seeds in Rockwool Cubes for Hydroponics
Find over 500 Cannabis Culture Videos on RuffHouseTV. The ONLY place to find the entire catalog of RuffHouse Studios’ Videos.
InfusedEats – Cannabis Recipes
Find all of our popular Cannabis Infused Recipes with detailed instructions and video tutorials on every recipe.
Blazin’ Gear Product Reviews
Clear concise Cannabis Product Reviews. Dry herb vaporizer, wax pens, rosin presses and much more reviewed by RuffHouse.
How To Start From Seed With Rockwool Cubes
In this lesson, we will learn how to start your own seed with Rockwool Cubes. Below is a detailed guide to success with Rockwool, and a step-by-step video tutorial can be found at the bottom of the page.
Items you will need:
Rockwool Cubes have a PH of roughly 7.8. This is pretty alkaline, yet our plants prefer to grow in a slightly more acidic environment (between 5.5 – 6.5). In order to prepare our Rockwell cubes for the seeds, we need to soak them in some PH adjusted water, that way they have everything the seeds need to germinate and sprout; water and a slightly acidic environment.
Step 1: Hydrate And Stabilize The Rockwool Cubes
Get a bowl or some other container that is big enough to fill with water and have room left for your Rockwool cubes. Your average salad bowl will work fine for 3 Rockwool cubes, if you are planning on doing more than you will need a larger container.
Fill the container/bowl with water from your tap. You may also choose to use water filtered through a britta or reverse osmosis (R/O) water, I’ve had success with all 3 of them so whichever you have on hand will work fine.
Using either a PH test kit or a Ph meter, determine the Ph of the water. Water comes out pretty alkaline, usually around 7.4, so you will need to acidify it a little bit to bring that Ph down to the desired level. Aim for as close to a Ph of 5.5-6 as you can get.
To accomplish this, use either Ph down chemicals, or lime juice (as it’s acidic). Add these to the water in small increments (VERY SMALL), and test the water to see where the Ph is. Continue doing this until you have a Ph of 5.5-6.
Important: Do not let the PH of the water go below 5. A Ph this low will damage the fibers of the Rockwool Cube
Now that we have the Ph adjusted water, it’s time to stabilize and hydrate the Rockwool cubes in it. Insert the Rockwool Cubes into your container and let them soak for roughly 1 hour. Once the hour is up, the cubes will be big and fat with water. Take them out of the bowl of water and put them somewhere you don’t mind getting a little wet. Save the remaining water for step 3.
DO NOT SQUEEZE THEM TO DRAIN ANY WATER
Rockwool Cubes are designed to maintain the correct water to air ratio and squeezing them may damage their structure. Some of the marijuana forums advocate doing everything from squeezing them completely dry, all the way to flinging them around like paintbrushes in order to get excess water out. None of that is necessary, leave it as it is. It will stay moist for several days without needing to be watered this way as well.
On top of that, Rockwool is like asbestos, you don’t want to be squeezing it or breathing it or generally touching it any more than you need to. Here is a good article on some of the health concerns of Rockwool. I use it because it is what works best, but be cognizant to the fact that it is a potentially dangerous substance to be making contact with so don’t do anything more than you need to with it.
Here is what it should look like:
Step 2: Plant Your Seeds
Most Rockwool cubes come with holes in them, if yours did not, than create a hole in one side that is approximately a quarter inch (0.75 cm) deep.
They should look like this:
Take 1-2 seeds and insert them carefully into the holes. Use a toothpick or similar object to push them down to the bottom, as you want them to be at the bottom of that hole. Rip or push a piece of the Rockwool over the hole (you don’t have to fill it completely), so that the seed can germinate in a dark moist environment.
Now, if you can, place them in a tray with a dome on it. This will help create a little humidity in there which seedlings like. This is not mandatory, but it helps. Whichever you choose, take your cubes and put them in a cool dark place, and leave them alone. The temperature should be roughly 68 degrees F, though my house stays at about 72 and they do fine there. I usually place them above my refrigerator and just leave them for a day or two. My lettuce seedlings sprouted with a quickness the last time I tried, and by the 3rdday they had grown so tall that I had to take the plastic dome off of my container because they were bumping up against the ceiling.
Step 3: Leave Them Alone And Let Them Grow
If you put more than one seed in your cube (just in case one didn’t make it), than you probably have several seeds sprouting up in each cube at the end of ~3 days. Once the first true leaves emerge, we want to select for the strongest one (the one that grew the tallest), and cut off the tops of all other seeds that are growing next to it. Do not pluck them out, as you may uproot it’s neighbors. Simply cut it off as close to the hole as you can without messing with the stronger one that you plan on keeping alive.
Depending on how hot it is (and other factors) you may need to water your cubes 1-4 times a day. Use the Ph adjusted water when doing so (that’s why I had you save the leftovers from step 2). If you already threw that water out, go make another batch of Ph adjusted water and keep it in a separate bottle or container for watering. Note: Do not over water, in fact while some say to water 1-4 times a day, I did it only once a day when I got home after work.
Some people claim they use a diluted nutrient solution to water their Rockwool cubes with during germination. Do not do this, as my experience has always been negative. Note the picture below, where I did an experiment by adding a very diluted grow nutrient to the Rockwool cube on the far left. It died within an hour or two, and the others went on to live happy lives. In my opinion, they do not need nutrients until they get into your hydro system.
Do not add any nutrients to your Rockwool Cubes. The one on the left got nutrients, the other two did not.
Step 4: Transplant Into Their Final Destination
About 2-3 weeks after germinating, you are ready to transplant these babies into the hydroponic system of your choice. A good rule of thumb to go by is that you want to transplant them once the first roots begin poking out of the Rockwool cube. Don’t wait too long though, as eventually the roots will begin tangling around the cube since it is their only source of water. You want to catch them right as they pop out, so that when you transfer them into your hydro system the roots will grow down into the system, and not just try to feed off the Rockwool cube alone.
If you have any questions, suggestions, or comments, please leave them below and I will do my best to answer all of them.
Hydroponic Growing Mediums: How to Plant into Rockwool Cubes
Pros and Cons of Using Rockwool Cubes as a growing medium
Pros of growing in Rockwool cubes
- Sterile medium for cloning
- Good drainage
- Excellent for seed germination
- Can use any nutrient solution
- Easy to transplant
- Easy for roots to penetrate
- Can be added to compost
Cons of Rockwool cubes as a hydroponic growing medium
- Naturally High pH
- Not sustainable
- Not biodegradable
- Potentially dangerous to human health
- Grows surface algae
What is a Rockwool cube made of?
Rockwool cubes are made from chalk and the basalt rock that is formed by volcanoes, heated to a high degree (3000 ℉ ) of heat then spun and cooled. Next, a binder is added and the substrate is flattened to form a sheet. Rockwool is often sold as a hydroponic growing medium in granulate mini blocks, starter plugs, cubes, and slabs. Their dense structure promotes strong root development making it ideal for seed starting in a hydroponic system. Although Rockwool is made from natural materials, the process is not natural making the substrate unsustainable, energy-intensive, and not biodegradable.
The physical properties and harmful chemicals of Rockwool cause skin, eye, and lung irritation and have been linked to long-term health concerns. ( Environmental Protection Agency lists it as a “Group 2B” material)
Are Rockwool cubes good for cloning?
Rockwool is a sterile, manufactured substrate containing no pests, weed seeds, or diseases making it a common choice for cloning plants in a sterile environment. This also means that it contains no beneficial fungi or nutrients. This is ideal for those wanting to retain full control of their nutrient solution and regimen.
When cloning in any soilless media it is important to maintain humidity with a humidity dome throughout the rooting process. We recommend using our 6” tall humidity domes to provide growing space and ideal conditions for new seedlings and stem cuttings.
Hydroponic Gardening with Rockwool
Seed Starting Using Rockwool Cubes
Seeds are easy to plant in the 2 inch Rockwool cubes that fit inside the Bootstrap Farmer 32-cell insert tray. These typically have an indentation in the center for the seed or seeds. For smaller seeds, dip a moistened toothpick into your seeds to pick up one or two. Insert the toothpick into the indentation and twist it against the side of the hole to release the seeds.
Once all of the cells have been planted, ensure that the media is evenly moist and place under a blackout dome until the majority of the seeds have sprouted.
Planting clones in Rockwool cubes
Planting softwood clones in mineral wool work very well because of the moisture-retaining properties. When a new cutting is starting to form root buds, drying out could send the cutting back into survival mode instead of new plant development. To plant clones, use sterile equipment to take a stem cutting from the mother plant. Dip the end of each stem cutting into rooting hormone, honey, or aloe powder to protect it from bacteria. Push the cutting into the cube at least an inch deep but not through to the bottom.
The cubes can then be placed into a tray with holes or one of these mesh tray sets for the rooting period. The mesh tray will allow for easy bottom watering with the 1020 deep tray while the humidity dome will ensure proper moisture levels until roots have formed. Place the entire 1020 on a heat mat with a thermostatand keep between 70℉ and 80℉ until root growth is established.
What can I use instead of Rockwool cubes?
Sterile growing media like ProMix , soil blocks, coco coir , hemp mats , clay pellets, decomposed granite, perlite, vermiculite, peat moss, and potting soil are all viable alternatives to using a Rockwool slab or cube for starting seeds, planting, and cloning.
How often should you water seedlings in Rockwool?
Rockwool is very good at holding moisture. Its superior water retention abilities make it ideal for delicate new growth. Plants growing in Rockwool can handle daily waterings. The material of the Rockwool also allows excellent air circulation, making overwatering difficult. This makes it an ideal substrate for hydroponic techniques. Rock wool cubes are often planted into 32 cell trays and watered in a flood and drain system like this automated grow rack .
What is the pH of Rockwool?
Rockwool tends to be too basic for most plants that prefer acidic soil conditions. With a pH between 7 and 8, you must presoak Rockwool in a slightly acidic solution (pH 5.5 to 6.5) for at least an hour before use. This can be done by adding several drops of lemon juice or pH down to the water, using pH test strips to attain the correct acidity. Once in use, you need to pay attention to the pH as it can quickly shift. This is why many prefer to use coco coir instead of Rockwool.
Can I put Rockwool in my compost?
While Rockwool or any type of mineral wool is not biodegradable it can be added to compost in order to add drainage and eventual mineral content to the resulting soil. If you plan to add your used Rockwool cubes to your compost bin you will want to shred them as much as possible before mixing them in. Left whole they can persist in the soil indefinitely because mineral wools do not contain any organic matter.
Some growers choose to reuse Rockwool although it is not recommended because once the cubes are full of roots they can begin to harbor mold, fungus, and detrimental bacteria. If you do choose to reuse your cubes, allow the roots inside to dry completely and then sterilize them by submerging them in boiling water for at least 10 minutes. For more information on proper equipment, cleaning check out this article on How to Wash and Care for Seedling Trays.
Rockwool can be a great tool for hydroponics, cloning, and seed starting. While it does come with some limitations, it can be the perfect substrate for certain applications. For more information on ways, growers and gardeners alike start their seeds indoors, check out Seed Starting: 101 Starting Seeds Indoors For Your Garden.