Posted on

Right led high in cannabis seed stage

How To Grow High Quality Plants

Are you in one of the many states that has legalized cannabis? If yes, then you may have found yourself with a new crop to plant in the garden this summer. Growing a new crop can be challenging even for veteran gardeners, but with a little help from your friends at Impello you can avoid some of the common mistakes that lead to a poor crop.

Pick Reliable Cannabis Seed Banks

When purchasing cannabis seeds, you might often choose the cheapest ones to save some bucks. However, the quality may be compromised, and you’ll end up spending more than you have to. That’s why you should pick cannabis seeds with the best genetics. Conduct your research so that you can buy from trusted cannabis seed banks. Cloning can be a good start too — just make sure to get the clones from reputable sources.

Provide Enough Lighting

One essential element for growing cannabis is proper lighting. It’s not only the quality that will be affected but also the speed and size. While marijuana grown outdoors gets natural light, indoor cannabis needs extra care. This means that your usual lightbulbs are not enough to make up for the absence of lights.

Invest in more premium lights, hoods, and reflectors. Get high-intensity (HID) lights, like high-pressure sodium (HPS) or T5 fluorescent lights. You can also use LEDs to save on energy costs. Just make sure to choose full-spectrum LED lights that allow you to modify the wavelength based on the marijuana plant’s needs as it grows.

Enhance Water Quality

Dissolved solids from water can cause adverse effects on your marijuana plant. For instance, domestic water contains chlorine and fluoride. While they will not kill the plant, maximum yield can’t be expected. So, consider using a reverse osmosis system or filtration. Make sure to change the filters regularly. It’s also best to test the water from time to time to check whether the parts per million (PPM) of dissolved solids remain the same.

Secure Enough Spacing and Ventilation

Wondering how to grow high-quality marijuana? Allow enough spacing between the cannabis buds. Make sure no leaves or branches block the airflow. You can apply low stress training (LST) where you tie the plants down while they’re still young to ensure that the light is well-dispersed, improving the plant’s overall health. Using other tools like filters and fans will also help you maintain the airflow.

Provide Sufficient Amount of Nutrients

One of the 10 steps to growing weed is providing just the right amount of nutrients per growth stage.

Tribus Original is the perfect seedling to harvest cannabis growing products on the market today and it’s very versatile. Usage rates are 1 ml per gallon and with a price tag under $60 for a 250 ml bottle, and a little goes a long way. Because it consists of beneficial bacteria you really can’t overfeed your cannabis plants with it, and it creates stronger plants from the inside out. For best results apply it to your grow media at least once a week. Tribus is compatible with all grow media, including hydroponics and even field application.

In addition to Tribus, these nutrients are necessary when feeding cannabis plants.

Nitrogen, potassium, and phosphorus may be the three main nutrients that your cannabis plants need. However, they also need other nutrients like:

During the flowering stage, various supplements can be beneficial too. These include:

Prune Cannabis Properly

While low stress training does not involve cutting, you have to perform pruning to promote yield increase in plants. It also helps you get rid of buds that are not in their best condition. This way, buds become fewer but larger and healthier. Consider removing the lowest branches to ward off pests. To ensure that the plants recover and grow faster, prune during the vegetation stage.

Keep the Right Room Temperature and Humidity

Cannabis can grow well under several conditions, but you need to ensure that the room’s temperature and humidity satisfy the weed’s needs. Even small changes can affect its growth, so focus on the temperature and humidity in each stage.

Seedling Stage

For seedlings and clones, the preferred humidity levels range from 65% to 80%. This way, they can take up enough water and have stronger roots. In terms of temperature, keep it at 25 degrees Celsius or 77 degrees Fahrenheit during the day and 21 degrees Celsius or 70 degrees Fahrenheit during the night.

Vegetative Stage

In the vegetative stage, moderate humidity levels are necessary. Every week, you can decrease it by 5%. Around 40% to 70% will work. Given that the roots are stronger during this period, they can absorb more water, so lowered humidity levels are preferred. For the temperature, you can raise it a bit — around 71 to 82 degrees Fahrenheit during the day and around 64 degrees Fahrenheit to 75 degrees Fahrenheit at night.

Flowering Stage

Reducing the humidity levels to 40% to 50% is needed during the flowering stage. You can make it 55% but never 60%. Also, the temperature can decrease to 68 to 78 degrees Fahrenheit. Then, in the latter part of the flowering period or one to two weeks prior to harvest, reduce humidity levels from 30% to 40%.

Meanwhile, the temperature can fall between 64 to 75 degrees Fahrenheit or 18 to 24 degrees Celsius with lights on and 16 to 20 degrees Celsius for several nights before harvest. To monitor the humidity and temperature, use a hygrometer and thermometer.

Lowering Temperature

If you aim to lower the temperature, you can do the following:

  • During the day, keep the lights off; during the night, on.
  • Add an air conditioning unit. This can also help reduce humidity.
  • Use a cool tube if you are growing marijuana with HPS lights.

Increasing Temperature

To raise the temperature, you can:

  • Utilize a quality space heater with a thermostat.
  • Use grow lights with higher watts.
  • At the bottom of your grow room or tent, place a heating mat.

Lowering Humidity

If you want to drop the humidity levels, perform these steps:

  • Water your marijuana plants immediately after switching on the lights. Given the quick absorption, humidity levels will decrease.
  • Get a humidifier.
  • Have an airflow fan upgrade to increase the supply of cool air.

Increasing Humidity

Enhancing humidity levels can be possible through the following:

  • Use a humidifier that has enough water reservoir to avoid frequent refills.
  • Using a spray bottle, mist your marijuana plants. However, this shouldn’t be done to flowering plants as it can result in bud rot.
  • Bring larger plants inside the room. Compared to seedlings, they perspire more, raising the humidity levels in the grow room.
  • Consider hanging wet towels inside your grow room.

Maintain Enough CO2

Did you know that providing your marijuana plants with sufficient carbon dioxide (CO2) helps improve their growth by 20%? CO2 is crucial in photosynthesis, where cannabis absorbs light and turns it into energy. Excessive CO2 or a lack of it can be detrimental to your cannabis plants. So, you should know how to provide them with the right CO2 levels. Ideally, it should be above 250 PPM.

To supplement your plants with extra CO2, you can use the following:

    • CO2 generator: To produce carbon dioxide, the CO2 generator burns natural gas or propane. It automatically turns on or off if a certain CO2 level is reached. However, burning the gasses can create heat. So, it’s advisable to use one in a larger grow room.
    • Compressed CO2: With this option, the manufacturer produces the gas and compresses it into a tank. No heat is produced once gasses are released, so you won’t have issues with the temperature and humidity levels. It can also be set to automatic using a controller. Note, however, that both CO2 generators and compressed CO2 can be relatively costly.

    Know When To Harvest the Cannabis Plants

    Harvest time keeps growers excited, especially given all the efforts exerted to produce healthy and quality buds. However, cutting them too soon will defeat the purpose and waste all your hard work as the tetrahydrocannabinol (THC) content will be low. So, harvest them at the right time based on the following indications:

    Dry and Cure Cannabis Properly

    You may think you’re done once you harvest your cannabis. However, drying and curing are important steps to producing quality and tasty buds. First, drying helps reduce the bud’s moisture content to 15%. It also enables you to maintain its taste and the natural compounds in it, including THC. To dry cannabis properly, follow these steps:

    1. Cut down your cannabis plants. While most growers prefer to cut off the branches, some want to cut until the base and hang them upside down. Others will also cut off each bud and then place them on a drying rack.
    2. Trim to remove larger fan leaves. Doing so will contribute to your buds’ improved look. If you’re residing in a place with less than 30% humidity levels, trim fewer leaves.
    3. Begin the slow drying process. A temperature of 65 to 75 degrees Fahrenheit and 50% humidity is preferred. If it exceeds 80 degrees, the terpene content will go away. While hanging the buds upside down is the most common method, you can use a drying rack or cardboard to lay them out. Generally, you need three to seven days to dry the buds well.

    After the drying process, you can now proceed to curing to preserve the plant’s cannabinoids or compounds and terpenes. Simply perform the following:

    1. Put the cannabis buds into mason jars with a wide opening. Other alternatives include plastic or wooden vessels.
    2. Secure the container in a dark and dry area. Humidity levels should range from 60% to 65%.
    3. Check the containers regularly. Open them at least once a day for two weeks. Doing so will remove extra moisture and accommodate fresh air.

    While your cannabis should be ready for use in two to three weeks, keeping it for around two months is recommended for maximum results. Commercial grow operations may prefer to use chemicals to hasten production. However, the whole experience of users may be compromised.

    Conclusion

    There are multiple factors to consider when growing cannabis on your own. However, growing cannabis indoors step by step with our guide above will help you produce quality buds that you’re proud of.

    How Far Away Do I Keep My Grow Lights?

    Although this detail is often overlooked, in many cases cannabis growers can increase their yields and potency simply by keeping their grow lights just the right distance from their plants!

    How far away should you keep your grow lights for the best cannabis yields and potency?

    Cannabis plants capture energy from light and use it to grow bigger buds. In order to maximize your cannabis yields you’ll want to give your plants as much light as possible, but without causing light burn. In other words, you want to increase light levels but without going overboard!

    While standard fluorescent grow lights like T5s and CFLs really don’t produce enough light to overload your plants, powerful lights like HPS, LECs and LEDs can do so with ease. Although LED, LEC and HPS grow lights can produce the biggest yields and most potent buds of all grow lights, they need to be used correctly to get those results!

    You get bigger yields and more potent buds by using powerful grow lights and keeping them just the right distance away from your plants

    By positioning grow lights the right distance from your plants, you’ll create the highest levels of light your cannabis plants can use. Put your buds in this “sweet spot” light level zone, and they’ll reward you!

    Notice with these plants how all the top buds are big, while the lower buds are smaller. You want to keep grow lights close, because buds closest to the grow light get the biggest. (Do I need side lighting?)

    More light is better when it comes to yields, but unfortunately that’s only up to a point. Although it may be tempting to keep trying to move grow lights closer and closer, your plants simply can’t use more light past a certain point!

    In fact, if you keep your lights too close to your cannabis plants, you’ll see bleaching, yellow leaves and nutrient deficiencies, so it’s important to find a balance!

    Each type of light needs to be kept a different distance away, so if you feel confused, this tutorial will show you how far to keep your grow light so you get incredible results every time, no matter what your setup!

    Metal Halide & HPS Grow Lights

    HID grow lights like Metal Halide and HPS (High Pressure Sodium) are the most widely-used and debatably the highest-yielding grow lights available for growing cannabis.

    Metal Halide lights are well-suited to the vegetative stage and tend to encourage plants to grow short and squat though they are less electrically efficient than HPS. HPS lights are suitable for both the vegetative and flowering stage of cannabis growth and the light they give off encourages plants to quickly grow tall and produce big buds. Despite these differences, MH and HPS bulbs need to be kept about the same distance away from your plants. The proper distance actually depends on the size/wattage of your lamp.

    Here’s a quick reference guide to use as a starting point:

    Grow Light Closest ~ Sunlight Furthest
    150W 8″ (20cm) 10″ (25cm) 12″ (30cm)
    250W 10″ (25cm) 12″ (30cm) 14″ (35cm)
    400W 12″ (30cm) 14″ (35cm) 19″ (48cm)
    600W 14″ (35cm) 16″ (41cm) 25″ (64cm)
    1000W 16″ (41cm) 22″ (55cm) 31″ (79cm)

    150W – covers 2′ x 2′ (0.6m x 0.6m) area

    250W – covers 2′ x 2′ (0.6m x 0.6m) area up to 2.5′ x 2.5′ (0.8m x 0.8m)

    400W – covers 3′ x 3′ (0.9m x 0.9m) area up to 3.5′ x 3.5′ (1m x 1m)

    600W – covers 3.5′ x 3.5′ (1m x 1m) area up to 4′ x 4′ (1.2m x 1.2m)

    1000W – covers 4′ x 4′ (1.2m x 1.2m) area up to 5′ x 5′ (1.5m x 1.5m)

    With all grow lights, always do the “hand test” after you’ve positioned your light. If you put your hand where your plants are for 30 seconds, does it feel too hot for you? If so it may be too hot for the plants and the light should be moved a bit further away even if it’s already within the acceptable range.

    A 600W HPS light should be kept about 16″ (40 cm) away from the tops of your plants

    This grower didn’t keep moving the 600W HPS light up as plants got taller, and some colas on the left plant got within 12″ (30 cm) of the bulb. As a result, the top buds and leaves on that plant got burnt and/or bleached.

    In addition to the wattage, it’s important to realize that older bulbs stop giving off as much light over time, so new MH/HPS bulbs generally need to be kept further away and older bulbs should be kept closer than the normal recommendations.

    If you’re using new bulbs, never start closer than the “~Sunlight” distance on the chart and only move lights closer if your plants are stretching towards the light (getting tall and lanky).

    If you’re using older MH/HPS bulbs, you should replace them if you can, but if that’s not possible you can keep your bulbs closer to help make sure your plants are still getting good light levels. This is why it’s beneficial to be able to test your current light levels with a lux meter.

    In general, MH bulbs need to be replaced about once a year (every 2-3 grows), while HPS grow lights last a bit longer, up to 2 years (every 4-5 grows). Older HID bulbs give off less light and more heat, so in addition to keeping the right distance, make sure you’re aware of the age of your bulbs. To maximize the light to my plants in the flowering stage, I personally replace HPS bulbs every 3rd grow, but that’s a bit excessive.

    If you see that all the leaves are turned up toward the light, it’s a sign your plants may be getting too much light. This puts them at risk of getting light burn unless the light gets moved up.

    LEC/CMH Grow Lights

    LEC stands for “Light Emitting Ceramic” while CMH stands for “Ceramic Metal Halide”. These are just two different ways to describe the same grow light technology. “LEC grow lights” are only sold by Sun System because the term “LEC” is trademarked by them. Sun System LECs only come in 315W and 630W sizes, as do most CMH lights. LEC lights usually have proprietary reflectors, whilesome CMH lights use more typical MH/HPS reflectors.

    315W is the most popular size for LECs/CMH grow lights. Both the 315 LEC and 315 CMH grow lights should be kept at least 18″ from the top of your plants, with some models needing to be kept as far as 3 feet away.

    “CMH” grow lights have been around for many years, and used to come in typical HID sizes like 400W, 600W and 1000W. Recently, they almost always come in 315W or 630W sizes so they can compete more directly with the branded LECs.

    Regardless of the name, LEC grow lights are basically a hybrid between Metal Halide and HPS grow lights. It is a type of Metal Halide bulb that is constructed with ceramic like an HPS. As a result, LEC grow lights last longer and are 10-20% more electrically efficient than MH lights. They also produce relatively high levels of UV rays, which may contribute to increased trichome development on cannabis buds, and can potentially make buds more potent.

    When it comes to distance, LEC grow lights produce an extremely powerful light and typically need to be kept further away from your plants than HPS grow lights of a similar wattage. The proper distance varies wildly between models.

    Sun System LEC Grow Lights

    LEC Grow Light Model Distance From Plant
    315W 18-20″ (45-51cm) or more
    630W 24-26″ (60-66cm) or more

    Other CMH models may need to be kept up to 3 feet away! Always read the instructions or ask the seller. Here are some examples I’ve found the distances for:

      – 2.5-3 feet (76-91 cm) from plants – 3 feet (91 cm) from plants – 24 inches (60 cm) from plants

    *Keep LEC grow lights an extra 6-12″ (15-30cm) away for young plants, or if you see signs of leaf stress. If you’re noticing symptoms on just the tops of the plants closest to the light, as opposed to evenly on all the leaves, the problem may be that the light is too close, even if it looks like a nutrient deficiency!

    Same as with MH/HPS grow lights, always conduct the 30-second “hand test” after you’ve positioned your light. If the light bothers your hand after 30 seconds, it may bother your plants!

    LEC grow lights are surprisingly powerful and must be used with caution to prevent light burn, especially with seedlings and strains that tend to be more sensitive to light. This 315 LEC is being kept 2.5 feet (75 cm) away from the tops of these young plants until they get bigger. Some CMH models need to be kept 3 feet away from the tops of plants!

    LEC bulbs last longer than either MH or HPS grow lights, and only need to be replaced every 6-7 grows.

    LED Grow Lights

    LED grow lights are powerful and can get great yields when used correctly. But when growing cannabis with LED grow lights it can be a little tricky to get the distance just right.

    Unlike with MH/HPS/LEC grow lights, there is no “standard” distance to keep each LED grow light and it’s hard to summarize with a quick chart like the others. The distance needed between an LED and the top of the plants varies quite a bit from model to model and from manufacturer to manufacturer. Many things can affect the optimal distance from plants, including the individual size of each LED bulb and the way the manufacturer used lenses to reflect light downwards at your plants.

    Different models of LEDs have different optimal distances

    Contact the Manufacturer If Possible – Ultimately when it comes to LED grow lights, the best thing to do is contact the manufacturer (or read the specifications) to see what is recommended as far as distance from the tops of plants.

    If in doubt, keep LEDs further away – It’s very common for cannabis growers to believe that as long as the temperature is under control they can keep LED grow lights as close as they want. Unfortunately this is not true. Although LED grow lights run cool, the LEDs available today give off an intense amount of light which is great for yields, but can give your plants light burn if kept too close.

    The reason this can be such a problem with LEDs is it can take a few weeks before your plant really starts to show symptoms. Usually the upper leaves are affected first (yellowing or turning brown or spots) by too-close LEDs, but symptoms can also affect other parts of the plant.

    Keeping LEDs Too Close Can Give Your Plants “Sunburn” That Looks Like a Nutrient Deficiency!

    Depending on the make and model, there’s a lot of difference in operating different LED grow lights, but if you weren’t given any instructions with the light, here’s a quick reference guide:

    Type of LED Grow Light Distance From Plant
    1W Bulbs at least 12″ (30cm)
    3W or 5W Bulbs at least 18″ (45cm)
    High Wattage (300W+) up to 30″ (75cm) or more

    Powerful LED grow lights need to be kept relatively far away from your plants to prevent light burn

    Fluorescent Grow Lights (like CFLs & T5s)

    As long as it’s not too hot, you basically can’t give your cannabis too much light with these types of grow lights. Fluorescent lights like T5s and CFLs typically can’t produce enough light to cause “light burn” the way you get with the other, more powerful lights. So the idea is to keep your plants as close as possible as long as the distance passes the “hand test.” You know your lights are a good distance away as long as you can put your hand where your plants are for 30 seconds and it doesn’t feel too hot for you. Just make sure to give enough extra space for fast growing plants because the heat can hurt them if they grow into the lights!

    Keep Fluorescent Grow Lights As Close As You Can to Cannabis Plants Without It Getting Too Hot!

    With fluorescent grow lights, it becomes especially important to learn how to use plant training techniques. You will need to train your plants in order to achieve an even canopy and get good harvests. But with good training, you can grow cannabis under CFL grow lights that look like this!

    Or T5 fluorescent lights to grow cannabis like this!

    For the best results with T5s and CFLs, try to keep the lights as close as possible and adjust them every day to prevent the plants from growing into the light.

    Measuring Optimal Cannabis Light Levels

    If you have a Lux Meter to measure your brightness levels, you can get even more accurate with your grow light distance. A Lux meter isn’t a perfect measurement of light because “lux” isn’t exactly what matters to your plants (lux is a measure of light as humans see it).

    However, a lux meter is accurate enough for indoor cannabis gardening when it comes to fluorescent, CFL, MH and HPS grow lights!

    Quick Guide – Lux Levels for Optimal Cannabis Growth

    Life Stage Maximum Good Minimum
    Vegetative 70,000 lux 40,000 lux 15,000 lux
    Flowering 85,000 lux 60,000 lux 35,000 lux

    < 15,000 lux– sparse or “stretchy” growth – plant isn’t getting enough light
    15,000 – 50,000 lux – good amount of light for healthy vegetative growth
    45,000 – 70,000 lux – optimal amount of light for cannabis plants in the flowering (budding) stage
    70,000 – 85,000 lux – a lot of light, some strains thrive at this light level, but some plants (especially auto-flowering and indica strains) lose their top leaves early under this light intensity and need lights to be kept further away for healthy growth
    > 85,000 lux – at this light intensity, you’ve hit the plant’s “saturation point” which means your plant can’t use all the light (be careful of light bleaching!)

    Note: Unfortunately, a lux meter may not be a good tool for estimating the brightness of LEC/CMH or LED grow lights. Lux meters have been calibrated to be accurate for incandescent light bulbs. Although this is close enough to fluorescent and some HID lights that it doesn’t make a huge difference to your plants, the unique color spectrum of LEC/CMH LED grow lights doesn’t always translate well when the lux meter is trying to measure light levels.

    Increase Marijuana Yields Even More With Training!

    Tip: In addition to knowing the right distance to keep your grow lights, many cannabis growers can increase their yields even more by using plant training to take advantage of that “sweet spot” where plants are getting the best amount of light. Training plants to grow with many colas of the same height (like the cannabis plants pictured below) allows dozens of buds to be the same distance from the grow light, so all the buds can be in the sweet spot at the same time!

    Get many colas close to the light for the best yields!

    Signs of Cannabis Light Stress

    Here are some examples of light stress appearing on the parts of the plant closest to the light. Learn more about light stress.

    If the leaves start pointing up like this, it’s a sign the plant is getting a LOT of light. Some growers like to see their leaves “pray” but if you see this keep a close eye to make sure leaves don’t start turning yellow early.

    Keeping grow lights too close hurts your plants! These plants were too close to their LED grow lights for too long, and their top leaves started getting bleached from light burn!

    Sometimes the tips of leaves will turn yellow in response to the grow light being too close. This is different from nutrient burn which produces brown tips, or nutrient deficiencies which typically appear all over the plant and are often caused by incorrect pH at the roots.

    Edges of leaves may turn up from light stress. If it goes on too long, the leaves will eventually get crispy or brittle, and you can easily break them off with simple bending.

    Closeup of yellow leaf from light stress

    Light Stress on Leaves – Notice how the leaves closer to the light have turned yellow, while the leaves further from the light are still green. This is a sign the plant is experiencing light stress and the grow light should be moved up several inches.

    Light Bleaching – Although it was a comfortable temperature in the grow space, the grow light was too close, which caused the yellow leaves and bleaching on the buds

    See also  San francisco cannabis seeds delivery