What To Do With Leftover Weed Seeds

You grow weed for its buds, but… do you throw out everything else? In this article we tell you everything you can do with its leaves, stems and root So you want to know what to do I do with all those weed stems? Look no further, we answer all your weed stem questions. Read on to learn more. When stored properly, your cannabis seeds can easily hold up for numerous years. Click here to learn how best to preserve your weed seeds.

How to make use of the leftovers from your cannabis harvest

While the goal of cannabis cultivation is to produce beautiful-looking, resinous and potent buds that result in an enjoyable and effective smoking experience, there are many other parts of the plant that are often left unused and discarded, including stems, leaves and roots. While these components may not be the most desirable parts of the plant, instead of going straight into the trash they can be used in a variety of ways to ensure you get the most out of your grow.

Reusing cannabis leaves

One of the most (unfairly) undervalued parts when it comes to the pruning and trimming processes are the fan and sugar leaves. However, both types of leaves can be reused once the plant has been harvested.

  • Sugar leaves: These are the small leaves that form around the bud of the plant, and are usually covered with resin, which is why they are called sugar leaves, as they have the appearance of being sprinkled with sugar. Due to the concentration of trichomes in sugar leaves, they are ideal for producing cannabis extracts such as bubble hash, dry sift, BHO or cannabis butter for use in various culinary recipes.
  • Fan leaves: The larger leaves that protrude from the plant are named for their distinctive shape and serve as the main source of capturing the sun’s energy, tending to appear in greater quantity on sativa varieties. These leaves do not contain high levels of cannabinoids but are excellent for juicing and making teas and are of particular interest to people looking to produce creams and salves.
    .

Sugar leaves surround the buds and have such a concentration of trichomes that they appear to be sugar-coated.

Cannabis leaf tea

Perhaps the most obvious use for cannabis leaves is to make a bookmark or use them as decoration, as their characteristic shape is a treat for the eyes. But if you decide to make tea with them instead, you’ll just need to follow a few simple steps:

  1. Heat some water in a pan, add the leaves and simmer for 30 minutes.
  2. Add half a tablespoon of coconut oil or a splash of full-fat milk to the tea and add honey, lemon or mint, according to taste. The oil or fat will absorb the cannabinoids, making the tea stronger than it would be with just water.
  3. Strain with a sieve or fine gauze to remove plant debris.

Now you have a drink full of therapeutic properties. Although to a much lesser extent than the buds, cannabis leaves also contain cannabinoids and terpenes that we can take advantage of with this delicious custom-made cannabis tea.

Some people also use the leaves to dress salads and make cannabis juice, recipes that also allow us to enjoy all of the plant’s properties. However, the THC content of leaves is very low, so they would not cause a psychoactive effect. The leaves will, however, help to cleanse the body of toxins, while also producing an anti-ageing effect. It has even been shown that the antioxidant properties can protect brain cells, as raw cannabis possesses neuroprotective qualities.

Compost your cannabis leaves

If you’re not a fan of tea or detox juices, you can also add the leaves to your homemade compost and make use of the nutrients they contain in future grows, as well as reduce the use of chemical fertilisers. You can add both weed leaves and branches to your composter and thus turn what would have been waste into a rich source of life.

Home composting is by far the easiest way to get a purely organic harvest. The truth is that nature itself provides excellent soil for growing cannabis, but in most cases, it needs to be enriched, either because we are growing indoors or because the soil needs additional nutrients for optimal plant growth.

Compost is becoming increasingly popular, as it can greatly help plants to reach their full potential. This is why it is known by seasoned growers as ‘black gold’.

Cannabutter with sugar leaves

Now that you have made use of the large fan-shaped leaves, you can go for the sugar leaves. These leaves are rich in cannabinoids and are ideal for making delicious cannabis butter. Due to the fat-soluble nature of cannabinoids, meaning that they dissolve in oil, we can make the most of the plant’s properties by adding this butter to our recipes.

However, they must first be decarboxylated, i.e. heated to activate their cannabinoids and optimise their therapeutic and psychoactive properties. To do this you should chop the leaves or grind them in a blender and spread them out on a baking tray. Then bake in the oven at 100 ºC for 40 minutes.

Cannabis decarboxylation

Today we are going to delve into the cannabis decarboxylation process, by which cannabinoids lose their acid form and “activate” many of their properties. This is an essential process when preparing cannabis edibles, so they have the desired effect, and a basic step to make the best recipes.

Now you can make your own cannabis-based butter:

  1. Place 300 ml of water and 250 grams of melted butter in a pan and mix them together.
  2. Add the sugar leaves (ground up and decarbed) and cook gently on a low heat for 8 hours.
  3. During this time, add 50ml of water every hour, to avoid it drying out. Stir the mixture and ensure that it doesn’t boil too hard.
  4. Strain the mixture through a cheesecloth to leave a viscous, green-coloured liquid.
  5. Pour the liquid into one or more glass recipients, close them and place in the fridge. This will allow the butter to solidify which aids the removal of any excess water. The butter should now have the characteristic light green colour typical of this preparation.

When preparing recipes with it, you should keep in mind that, unlike other preparations mentioned in this list, butter made with sugar leaf contains enough THC to cause psychoactive effects. This makes it an ideal ingredient to prepare a really fun meal.

When using sugar leaves, choose those that are greener in colour and without symptoms of nutrient excess or deficiency

Reusing cannabis stalks and stems

Before you ask if you can smoke the stems, be aware that they contain very little THC, the cannabinoid responsible for the cannabis “high”. So smoking stems will bring you far more risks than benefits: you are more likely to cough excessively or experience a sore throat if you don’t remove the stems when you’re rolling a joint.

However, for centuries, the stalks of hemp plants, the low-THC variety of cannabis, have been used for their fibrous qualities, to make paper, rope, boat sails, uniforms and just about everything else you can imagine that is now made from synthetic fibres (curse you, nylon!). In fact, hemp has been one of the most important crops for the development of human civilisation in ancient times. And you too can use harvested cannabis stalks to make various materials.

Hemp paper

Although it can be a bit laborious, cannabis stalks can be turned into paper and help to reduce tree felling. All you need is a mosquito net stapled to a wooden frame to give you a flat surface to strain the pulp from the stems and a blender.

If you want to make your own cannabis paper, follow these simple steps:

  1. Put a mixture of stems and paper in equal ratios (1:1) in the blender and add water so that you can stir the mixture easily, then blend well.
  2. Pour the blended mixture over the mosquito screen and allow the excess water to drain away to obtain the pulp.
  3. Move the screen frame gently to spread the pulp around evenly and obtain a square sheet of paper.
  4. Allow to drain for 24 hours then hang the resulting sheet of paper to dry.
See also  Candyland Weed Seeds

Now you have a sheet of paper made with the stems from your harvest, enjoy it!

Textiles from stems

If you don’t need drawing paper and prefer to do your writing on the computer, you can also use the stems to make twine which can be used for many purposes. To turn the stems into fabric it is necessary to strip them of their outer fibres, a process called decortication. Rub the stems with your fingers to separate their fibres into individual strands, then twist the strands together and see what strong cordage they form.

A cannabis stalk showing the fibres

Also, for those who are aware of the negative health effects of using a lighter (inhalation of butane fumes), a hemp wick is a great alternative, and you can easily create your own using cannabis stems. To do this, peel the stems with scissors or a sharp blade until you get long, strong fibres. Then twist them around each other to form a rope, bending and twisting tightly. Once you’ve twisted until you can’t take it anymore, dip the string in some beeswax and let it dry. You already have your own hemp wick to light your joints or to make a candle with melted wax, for those romantic occasions where you can win over your partner. Or for when we have to light our way in a blackout, which could also happen.

Tea with stems & stalks

If handicrafts are not your thing and you prefer to go back to a simple tea, you’ll be happy to know that you can also make a tasty drink from the stalks. Just don’t forget to decarboxylate them. Heat the oven to 110 °C and bake the stems for 60 minutes. Now you can make delicious tea from them.

Put a pot of water to boil and add the chopped stalks. Add a teaspoon of coconut oil and let it simmer for 7-8 minutes. Then strain the stems. Now you have an exquisite tea with a strong flavour that you can use to garnish a unique recipe and really impress your guests.

Mulch for your garden

You can use a wood chipper to break up the stems and create mulch. You can then add this mulch to your compost pile or return it to your garden. Mulch should only be applied to crops growing in living soil to ensure that it breaks down over time and becomes food and new habitat for beneficial insects. Also, keep in mind that you never want to use plants that have had disease or infestation; they are likely to spread that disease through the mulch.

Everything grown in the soil can be returned to the ground to close the recycling cycle

Now, if you found the stems of this plant useful, just wait until you see how you can take advantage of its root system.

Reusing cannabis roots

While not as commonly reused as stems and leaves, cannabis roots also have a purpose post-harvest. In fact, cannabis roots have been used in medicine since 2,700 BC, particularly in Chinese culture. The roots were processed and used to treat pain, gonorrhoea and even haemorrhages during pregnancy. Other cultures have also used cannabis roots to treat various conditions, such as fevers, wounds, ulcers and abscesses, as well as sciatic and joint pain.

Cannabis roots to make topical creams for the skin

So if you’d like to make your own homemade preparation to treat any of these symptoms, you can use the leftover roots from your harvest to make a topical cream. To do so, you’ll need to chop up the dried roots and grind them into a homogeneous powder. Use this cannabis root powder to mix with liquid or fats to make homemade creams and oils, to get the most out of the therapeutic properties of cannabis roots through your skin.

Other concoctions with cannabis roots

In addition, they can also be used to make a tea that is packed with therapeutic properties, such as relief from joint pain and cramps, relief from gout and other similar pains. In addition to tea, a kind of homebrew can be made from the root. To do this, the powder is boiled along with something aromatic (cinnamon stick, aniseed, etc.) in an earthenware pot for 12 hours. After that, it is cooled, strained and drunk. What’s more, if it is boiled again to reduce it after this process, a dark-coloured substance is obtained that can be used to make a tincture.

It can be difficult to remove any soil stuck to the roots, so using roots from hydroponics may prove less work

And now for a less conventional use. Gunpowder!

The roots of cannabis can not only be consumed. Throughout history, different civilisations found other uses for this material which many see only as a waste product, but nothing could be further from the truth. The ancient Chinese, in addition to its medicinal properties, made it into a component of gunpowder. Thus, according to old documents, once dried, ground and roasted, cannabis roots were mixed with bamboo roots, pine resin and other substances. This was used to create ammunition for weapons as varied as explosive catapults and a tyoe of hand grenade.

So that’s it for our list of applications for a harvest full of possibilities. We hope that some of them have inspired you to try them at home (except for the explosives and grenades, lest we have an accident) so that you can make the most of all the effort and patience you invested in your plants. Time to get to work!

The articles published by Alchimiaweb, S.L. are reserved for adult clients only. We would like to remind our customers that cannabis seeds are not listed in the European Community catalogue. They are products intended for genetic conservation and collecting, in no case for cultivation. In some countries it is strictly forbidden to germinate cannabis seeds, other than those authorised by the European Union. We recommend our customers not to infringe the law in any way, we are not responsible for their use.

What To Do With Leftover Weed Stems & Trimmings [Answered]

It’s easy to wonder what to do with weed stems. For many, the answer is simply to get rid of them. After all, they are harsh to smoke, and is there THC in stems anyway?

Actually, there is. The quantities are small, but when processed correctly, and at a high enough density, it can still get the job done.

In this article, we take a look at what to do with leftover weed stems and leaves so that you can make the very most of your stash.

1. Decarb Stems

The de-carb process is a scientific method of removing carbon atoms from your stems to breathe new life into its THC content. This process is actually required before cannabis can be used in any of its forms.

Even though it sounds very complicated, the process itself is very straightforward. If you have the supplies to make cookies, you are well equipped.

First, preheat your oven to 220 degrees Fahrenheit. As it’s warming, take your stems, and spread them carefully over a foil-lined roasting pan. It’s important to arrange the stems neatly, with no overlap so that they are all exposed equally to the heat.

Slide the pan into a middle rack, and roast for approximately thirty-five to forty minutes. It’s important to monitor your weed stems throughout the process. If they begin to brown or burn, the entire batch is ruined. To avoid this, consider rotating your pan once or twice during the bake time.

This will help to make sure the stems are baked evenly. Once your timer goes off, most experts recommend turning the heat off but allowing your pan to cool in the oven. It can take about an hour for a pan to cool completely. Patience is necessary, but the rewards are well worth it. Decarbonated weed stems!

Note: It may be better to err on the side of caution. When THC gets too hot it turns into a chemical known as CBN. While CBN requires temperatures of closer to 300 degrees, there are many ways that could still happen even with a milder setting on your oven. Your oven’s thermometer could be off or you simply leave it in for too long.

See also  Weed Free Seed

Though CBN has its uses, it’s not strongly associated with psychoactive effects, so be careful!

2. Create Cannabutter & Edibles

Once you’ve decarbed your weed stems, the process of using it to make cannabutter is actually quite simple.

Step 1: Grind it: Ideally, you will make sure that your mixture has a perfectly consistent texture. You don’t want to grind the stems too much, as this will make them more susceptible to burning. However, with a good, even consistency, you will be ready for your next step.

Step 2: Simmer: Next, melt butter in a skillet, and allow your newly ground stems to simmer on your stove’s lowest setting. Most people do this phase for about 40 minutes to an hour. However, it’s important to monitor your butter at all times. If it begins to brown or burn, remove it from heat. Stir regularly to avoid sticking.

If you have a candy thermometer, it will come in handy here. The goal is to make sure that the mixture never exceeds 190 degrees. Some “smart thermometers” can actually remain in the mixture for the entire length of the cooking process. These devices will send alerts to your phone if the temperature trends in the wrong direction. Short of this, your job will simply be to monitor it constantly.

Step 3: Strain the Mixture: Simmering the mixture allows your cannabis’s THC to naturally incorporate into the butter. Now that you’ve achieved that, you’re going to want to get rid of the unappetizing, grainy weed stems.

To strain your butter, pour it through a cheesecloth or fine mesh strainer. The latter tends to be preferred by most people, as cheesecloth will soak up some of your precious butter. Use what you have though. Once you’ve strained out the stem residue it’s time to move on to the next step.

Step 4: Refrigerate: This part is pretty easy. Put your mixture in the fridge and wrap it up tightly until it hardens. You now have a functional cannabutter!

It’s important to note that cannabutter doesn’t usually last as long as its pre-infused alternative. It typically has a shelf life of about two weeks (or about six months in the freezer), which means it is time to get to cooking.

Cannabutter can be used in much the same way as regular butter. For example, if you have a cookie recipe that calls for one cup of regular butter, sub in one cup of cannabutter instead. Just be careful when you consume your newly made edibles.

Many find that it is best to eat only small portions of your baked goods as you are figuring out your tolerance. If you want to learn more about cooking with cannabis, we have the perfect class for you. Join us in one of our Puff, Pass & Bake Cooking Classes.

3. Infuse in Alcohol

You can also infuse stems in alcohol by soaking them for long periods of time. Technically, it is possible to do this with rubbing alcohol, but THIS IS NOT RECOMMENDED, as isopropyl alcohol was not made to be consumed.

People tend to reach for rubbing alcohol because its extremely high alcohol content makes it very good at extracting a lot of THC. However, you can do the same good work with high-proof alcohol like Everclear. Bonus? It’s not toxic.

To perform this, begin by sticking your stems and the alcohol in the freezer.

The rubbing alcohol will not freeze. The stems will. This is good because it preserves more of the THC.

After twelve hours in the freezer, you’re ready for the next step.

Pour your alcohol and stems into a mason jar. Shake vigorously, and then pour both through a sieve into a bowl. The sieve will strain out the stem remnants, leaving behind a liquid with a greenish tint to it. Your cannabis is now infused with alcohol.

Now, it’s time to extract the toxic part. Pour the liquid on a flat surface, and wait for it to evaporate. This can take up to twenty-four hours. You will know you have completed your task when there is no more liquid on the surface. What remains will be small, THC-rich chunks.

4. Make Weed Stem Tea or Coffee

Cannabis-infused tea or coffee is actually very easy to make. To begin, boil one gram of your decarbed stems in a pot of water and here’s a hint, use a bit of milk. The milk has fat that the THC is attaches to easier.

Some people actually prefer to simmer instead, as this tends to preserve the flavors of the terpenes. Since we are working with the stems here, the flavor isn’t much of a consideration.

It takes about fifteen minutes to infuse the water with THC.

After, strain the water with a cheesecloth, and then steep your preferred tea for about three minutes. Or just pour that hot water over some ground coffee and WA-lah, talk about a pick me up.

5. Use in Smoothie or for Juicing

Cannabis stems can also be used for making a smoothie or for juicing. As anyone who juices or makes smoothies regularly knows, it’s an art form with an enormous amount of flexibility. You can put pretty much anything in there, which means there’s no precise recipe for juicing cannabis stems.

The natural flavors of the stems may encourage many users to opt for sweeter support ingredients (fruit, ginger, cinnamon, carrots, etc). However, you can also just incorporate the stems into your favorite existing recipe.

However, you do it, juicing your cannabis stems is certainly a worthy application. While there will be no psychoactive benefit to juicing raw cannabis stems, there are lots of nutritional boons. Cannabis stems are rich in antioxidants, as well as trace elements of a wide range of cannabinoids that boast their own health benefits. In fact, some experts believe cannabis is one of the most nutritionally rich plants on the planet!

6. Make Bubble Hash

You make bubble hash by submerging cannabis stems and trimmings in ice and then shaking it up really well. Simple, right? There are more sophisticated ways of doing it that involve fancy tools, but the amateur can get the job done easily enough with a spoon, paddle, or any other mixing utensil.

For the DIY version of bubble hash, fill a large bucket full of ice and water. Place your cannabis in the bucket, and stir vigorously in cycles. The idea is to mix but not crush the ice.

The mixing, or disruption process as many call it takes place over four 10-15 minute cycles.

Once you have completed your cycle strain the solution through a filter bag.

You will notice that your final product is very liquidy. To solve this, freeze it for several hours, then grind it to a fine powder and leave it to dry in a low humidity environment. This may take several days, but the wait is well worth it. Bubble hash is highly potent and features none of the harmful chemicals that so many hash products suffer from.

7. Composting

Composting is an environmentally friendly way to make the most of old plant materials. If you are not interested in using your cannabis stems in any other way, consider tossing them on the compost heap.

There are many ways to compost. Some use wood frames, ditches, or simply bare earth. Set up a predefined boundary, dump your organic materials, and help mother earth. It’s a win, win.

8. Use in Arts and Crafts

You can also just find ways to incorporate your stems into crafts. There are many nature-oriented arts and crafts projects that involve painting, making sculptures, dioramas, and all other manners of arts and crafts.

If you are looking for a guided craft, consider one of our legendary Puff Pass and Paint classes. These courses infuse art and cannabis in a way that is not only fun and inclusive but also well structured for people who take their art seriously. And hey, bring some of your weed stems to the class and we can incorporate them into your painting!

Frequently Asked Questions About Weed Stems

Can You Smoke Weed Stems?

Can you smoke weed stems? Technical, of course, you can. You can smoke stems the same way you smoke cannabis flower. The real question is if you should. Stems tend to taste foul and come down your lungs very harshly.

See also  Sweet Joe Pye Weed Seeds

They also have a much lower THC count than flower making it all the more impractical. If you are hard up for other cannabis, it might be worth giving it a shot. In most cases, however, it seems that Afroman was at his very wisest when he advised us all to “pick out the seeds and stems.”

Do Weed Stems Get Your High?

Weed stems do have the capacity to get you high, though it typically requires a much higher concentration to get the job done. The processes described in this article may improve your odds significantly.

For example, edibles tend to be more potent than smoked cannabis because they are metabolized by your liver. If you want to get as much mileage from your stems as possible, you might consider one of those methods.

However, you should moderate your expectations. The high will be mild at best, and more experienced users may not feel anything at all. For most people, stems enter into their cannabis diet either out of desperation or a desire not to be wasteful.

Is there THC in stems?

Stems do contain trace amounts of THC. The de-carbing process described in this article can help bring that THC to life, allowing you to enjoy the psychoactive effect. However, it’s important to note that the stems have very little THC relative to other parts of the plant.

For that reason, some users may prefer to reserve their stem stash for occasions in which they need to enjoy a much milder high. Doesn’t it sound nice to sit down and read a book with a steaming mug of stem-infused tea?

How to ground weed stems?

Grinding stems that have been dried requires essentially the same process as grinding any other form of cannabis. Insert the stems into your grinder, twist until the desired consistency has been achieved, and then use the stems however you prefer.

Note that you may wish for a coarser consistency than you may otherwise usually opt for. Stems tend to be dryer than cannabis flower. They will burn very hot and quickly no matter what you do, producing harsh, unpleasant smoke. A coarser grind won’t fix the problem entirely but it can help.

How To Properly Preserve Cannabis Seeds

Cannabis seeds, with their tough outer shell, seem pretty hardy. And while nature has definitely designed them to hold up to a wide variety of conditions, cannabis seeds aren’t invincible. Rapid changes in temperature and high humidity, for example, can quickly ruin a batch of seeds. Luckily, caring for your seeds is simple. Keep reading to learn how.

YOUR SEEDS ARE ALIVE

Many people forget this, but it’s true—your cannabis seeds are living organisms. Before they germinate, however, they are in a state of rest (much like some animals when they hibernate). And like all living things, seeds can die. When storing your seeds, you’ll want to give them the optimal conditions to ensure they hold through until you’re ready to germinate and plant them.

IDEAL CONDITIONS FOR CANNABIS SEEDS

Cannabis seeds have four main enemies:
1. Humidity
2. Temperature
3. Light
4. Oxygen

Ideally, you want to store your seeds in a cool, dark, and dry place. Whenever possible, keep your seeds in their original packaging. At Royal Queen Seeds, we’ve specially designed our packaging to protect our seeds until you’re ready to plant them.

If your seeds get exposed to light or rapid changes in temperature, these conditions will trigger them to use up their nutrient stores before they ever see soil, meaning they won’t have the nutrients they need to germinate. High humidity, on the other hand, can trigger fungi to grow on your seeds.

EFFECTS OF HUMIDITY ON CANNABIS SEEDS

Humidity is easily one of the biggest threats to your seeds. Here is how different levels of humidity (% relative humidity) affect your cannabis seeds:

EFFECTS OF HUMIDITY ON CANNABIS SEEDS

EFFECTS OF HUMIDITY ON CANNABIS SEEDS

WHERE AND HOW TO STORE YOUR CANNABIS SEEDS

For short-term storage, a dark cupboard or drawer with stable temperatures is usually fine. Try to keep your seeds out of areas of your house that are susceptible to the natural temperature changes of your local environment.

If, for example, you live in an area with very warm daytime temperatures and cool nights, try to protect your seeds from these changes and don’t store them outside in a shed or garage.

For long-term storage, it’s best to keep your seeds with a desiccant, such as silica gel, in a sealed container inside the fridge. Remember that opening the door of your fridge can actually cause some pretty dramatic temperature shifts. If you happen to have a second fridge that gets used less often than the one in your kitchen, use that one to store your seeds.

Again, whenever possible, keep your seeds in their original packaging. If you do open a pack of seeds and have leftovers, transfer the extra seeds directly into a sealed airtight container.

Ziplock bags, for example, are great because you can remove all the air from them to create an almost vacuum-sealed container for your seeds. Once vacuum-sealed, put your bag inside a dark plastic bag or dark container to protect your seeds from your fridge light.

Dry fridges are the best to store seeds. The problem is when there is humidity in the fridge, since humidity is the worst enemy for seeds (worse than temperature, light, oxygen. ). For this reason, it is better to store the seeds in No Frost fridges.

CAN YOU STORE SEEDS IN THE FREEZER?

Yes, cannabis seeds can be stored in the freezer. The lower the temperature, the slower they decline. However, it’s usually not necessary to freeze your seeds. Meet the conditions we outlined above, and you should be able to preserve your seeds for up to five years and still get a high germination rate.

KNOWING WHICH SEEDS TO PLANT AND WHICH TO STORE

When you’re ready to germinate your seeds, inspect them and germinate any seeds with damage to the outer shell first. The outer shell of your seeds is designed to protect the volatile genetics inside. Seeds with cracks in the outer shell are a lot more vulnerable and shouldn’t be stored.

At Royal Queen Seeds, we take pride in our work and want to ensure every grower only has the best genetics in their garden. That means we inspect all of our seeds before packaging. If you notice any damage to your RQS seeds, get in touch with our customer service team immediately.

TIPS FOR GERMINATING OLD CANNABIS SEEDS

We’ve all found an odd seed somewhere at the bottom of an old drawer or cupboard. Here are a few tips on how to germinate old cannabis seeds:

Before germinating your old seeds, try soaking them in carbonated water enriched with fulvic acid, germination booster, hydrogen peroxide, or gibberellic acid. For best results, use room temperature water and soak your seeds for 12 hours in a dark place.

Older seeds often have an extra tough outer shell. Gently scratching this shell with some sandpaper can help moisture and warmth enter your seed at the time of germination. Try gently scarring your old cannabis seeds just before soaking to help them sprout.

The ridge is the slightly elevated side of your seed. Like other parts of the shell, this ridge can become extra tough over time. Removing it gently with a sharp Stanley blade can help your seed sprout.

In a last attempt to germinate your seeds, creating a small cut in the seed’s shell may help. However, this is no miracle cure, and you’ll need to be careful to avoid damaging the inside of your seed. If you damage the embryo, the seed will never germinate.

Remember, some old seeds just won’t germinate no matter how much you try. Whenever possible, avoid buying more seeds than you plan to plant so as to avoid having any issues at the time of germination.